TUSB522PRGET

Texas Instruments
595-TUSB522PRGET
TUSB522PRGET

Nsx:

Mô tả:
USB Interface IC Fourth generation du al-channel USB 3.0 A 595-TUSB522PRGER

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 1,270

Tồn kho:
1,270 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 250)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$2.63 $2.63
$1.96 $19.60
$1.79 $44.75
$1.61 $161.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 250)
$1.28 $320.00
$1.24 $620.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Reel, Cut Tape, MouseReel
Sẵn có:
Có hàng
Giá:
$2.23
Tối thiểu:
1

Sản phẩm Tương tự

Texas Instruments TUSB522PRGER
Texas Instruments
USB Interface IC Fourth generation du al-channel USB 3.0 A 595-TUSB522PRGET

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: IC giao diện USB
RoHS:  
TUSB522P
USB Redrivers
Redriver, Repeater, Equalizer
SMD/SMT
VQFN-24
USB 3.1
Super Speed (SS)
5 Gb/s
3 V
3.6 V
92 mA
- 40 C
+ 85 C
Reel
Cut Tape
MouseReel
Nhãn hiệu: Texas Instruments
Nhạy với độ ẩm: Yes
Điện áp cấp vận hành: 3.3 V
Loại sản phẩm: USB Interface IC
Số lượng Kiện Gốc: 250
Danh mục phụ: Interface ICs
Đơn vị Khối lượng: 52.500 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

TUSB522P USB 3.1 Redriver & Equalizer

Texas Instruments TUSB522P USB 3.1 Redriver & Equalizer is a fourth generation, dual-channel, single-lane USB 3.1 GEN1 redriver and signal conditioner supporting 5Gbps. The device offers low power consumption on a 3.3V supply with its ultra-low-power architecture. The redriver also supports the USB 3.1 low power modes, which further reduces idle power consumption. The dual-channel capability enables the system to maintain signal integrity on both transmit and receive data paths. The receiver equalization has three gain settings to overcome channel degradation from insertion loss and inter-symbol interference. These settings are controlled from the EQ pins. To compensate for transmission line losses, the output driver supports configuration of De-Emphasis with pins DE. Additionally, automatic LFPS De-Emphasis control allows for full USB 3.1 compliance. These settings allow optimal performance, increased signaling distance, and flexibility in placement of the TUSB522P in the USB 3.1 GEN1 path.