STPM801-TR

STMicroelectronics
511-STPM801-TR
STPM801-TR

Nsx:

Mô tả:
Hot Swap Voltage Controllers Hot Swap & Ideal Diode Controller for high redundancy power architectures

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 24

Tồn kho:
24 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
36 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Thời gian giao hàng lâu được báo cáo trên sản phẩm này.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$11.77 $11.77
$9.15 $91.50
$8.73 $218.25
$7.58 $758.00
$7.24 $1,810.00
$6.60 $3,300.00
$5.79 $5,790.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$5.72 $17,160.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
STMicroelectronics
Danh mục Sản phẩm: Bộ điều khiển điện áp hoán đổi nóng
RoHS:  
Controllers & Switches
65 V
4 V
14 mA
- 40 C
+ 150 C
SMD/SMT
VQFN-32
Reel
Cut Tape
MouseReel
Nhãn hiệu: STMicroelectronics
Điện áp đầu vào / nguồn cấp - Tối đa: 65 V
Điện áp đầu vào / nguồn cấp - Tối thiểu: 4 V
Nhạy với độ ẩm: Yes
Loại sản phẩm: Hot Swap Voltage Controllers
Số lượng Kiện Gốc: 3000
Danh mục phụ: PMIC - Power Management ICs
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

STPM801 Hot Swap Voltage Controller

STMicroelectronics STPM801 Hot Swap Voltage Controller provides integrated hot swap, soft start, and o-ring protections. These protections prevent loads from high-voltage transients, limiting and regulating the output during an overvoltage event. These include load dumps by controlling the voltage drop across an external N-channel MOSFET. The device additionally monitors the input supply to protect it in case of overvoltage (OV) and undervoltage (UV) conditions.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.