ROB-17590

SparkFun
474-ROB-17590
ROB-17590

Nsx:

Mô tả:
Power Management IC Development Tools The SparkFun Qwiic Haptic Driver includes an itty-bitty Linear Resonant Actuator (LRA) vibration motor and Dialog Semiconductor's DA7280 motor driver IC for applications that require haptic feedback.Control the vibration motor with the DA7280 via I2

Có hàng: 12

Tồn kho:
12
Có thể Giao hàng Ngay
Đang đặt hàng:
44
Dự kiến 21/08/2026
31
Dự kiến 11/09/2026
Thời gian sản xuất của nhà máy:
22
Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$12.05 $12.05

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
SparkFun Electronics
Danh mục Sản phẩm: Công cụ phát triển IC quản lý nguồn
Development Kits
Motor/Motion Controller & Driver
2.8 V to 5.5 V
DA7280
Nhãn hiệu: SparkFun
Mô tả/chức năng: Qwiic Haptic Driver Includes an Itty-Bitty, Linear Resonant Actuator (LRA) Vibration Motor, Wires and Breakout Board for Dialog Semiconductor DA7280 Driver Motor IC for Applications that Require Hhaptic Feedback
Để sử dụng với: Haptic Driver
Loại giao diện: I2C
Loại sản phẩm: Power Management IC Development Tools
Số lượng Kiện Gốc: 1
Danh mục phụ: Development Tools
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Mã Tuân Thủ
USHTS:
8479899595
TARIC:
8473302000
ECCN:
EAR99
Phân loại nguồn gốc
Quốc gia xuất xứ:
Hoa Kỳ
Quốc gia lắp ráp:
Không Có sẵn
Quốc gia phân phối:
Không Có sẵn
Quốc gia có thể thay đổi tại thời điểm giao hàng.

Qwiic Haptic Driver - DA7280

SparkFun Qwiic Haptic Driver - DA7280 includes a Linear Resonant Actuator (LRA) vibration motor and Dialog Semiconductor's DA7280 motor driver IC for applications that require haptic feedback. Control the vibration motor with the DA7280 via I2C, PWM, or a combination of three general-purpose input pins. It uses the handy Qwiic system, so no soldering is required. Simply connect it to the rest of a system. Included are 0.1"-spaced PTH pads in case a breadboard is preferred to access the driver's I2C, power, interrupt, and general-purpose input pins on the edge of the board. This board is ideal for projects that require a physical indicator whenever an event is triggered.