MCP1665T-E/MRA

Microchip Technology
579-MCP1665T-E/MRA
MCP1665T-E/MRA

Nsx:

Mô tả:
Switching Voltage Regulators 32V Output 3.6A Boost Converter

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 6,310

Tồn kho:
6,310 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
4 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$2.05 $2.05
$1.70 $42.50
$1.55 $155.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3300)
$1.55 $5,115.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Microchip
Danh mục Sản phẩm: Bộ ổn áp chuyển mạch
RoHS:  
SMD/SMT
VQFN-EP-10
Boost
32 V
1 A
1 Output
2.7 V
5 V
400 nA
500 kHz
- 40 C
+ 125 C
Reel
Cut Tape
Nhãn hiệu: Microchip Technology
Điện áp đầu vào: 2.7 V to 5 V
Hệ số ổn áp tải đầu ra: 0.2 %
Dòng cấp nguồn vận hành: 3.6 A
Loại sản phẩm: Switching Voltage Regulators
Tắt: Shutdown
Số lượng Kiện Gốc: 3300
Danh mục phụ: PMIC - Power Management ICs
Loại: Integrated Switch PFM/PWM Boost Regulator
Đơn vị Khối lượng: 1 g
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
MXHTS:
8542399901
ECCN:
EAR99

MCP1665 PFM/PWM Step-up Converter

Microchip Technology MCP1665 PFM/PWM Step-up Converter provides a space-efficient high-voltage step-up power supply solution for applications powered by batteries. The MCP1665 converter features a 36V, 100mΩ integrated switch, controlled start-up voltage, internal compensation, adjustable output voltage, and Pulse Frequency Modulation / Pulse Width Modulation (PFM/PWM) mode. The Undervoltage-Lockout (UVLO) feature of the MCP1665 avoids start-up and operation with low inputs or discharged batteries for cell-powered applications. A typical 3.6A cycle-by-cycle inductor peak current limit operation protects the integrated switch. The output overvoltage protection and open-load protection turn off switching by short-circuiting the feedback pin when feedback resistors are accidentally disconnected. This MCP1665 converter creates a Boost, Single-Ended Primary-Inductance Converter (SEPIC), or flyback DC-DC converters within a small PCB area. The MCP1665 converter suits LCD bias supply for portable applications, camera phone flash, single-cell Li-ion to 5V, 12V, or 24V converters, flashlight, and lighting applications.