STR485LVQT

STMicroelectronics
511-STR485LVQT
STR485LVQT

Nsx:

Mô tả:
RS-485 Interface IC 3.3V RS485 compatible with 1.8V I/Os and selectable speed 20Mbps or 250kbps

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,487

Tồn kho:
2,487
Có thể Giao hàng Ngay
Đang đặt hàng:
6,000
Thời gian sản xuất của nhà máy:
30
Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$2.83 $2.83
$2.11 $21.10
$1.93 $48.25
$1.73 $173.00
$1.63 $407.50
$1.60 $800.00
$1.51 $1,510.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$1.47 $4,410.00
$1.44 $8,640.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
STMicroelectronics
Danh mục Sản phẩm: IC giao diện RS-485
RoHS:  
SMD/SMT
DFN-10
STR485
Transceiver
20 Mb/s
1 Driver
1 Receiver
Half Duplex
3.6 V
1.65 V
625 uA
- 40 C
+ 105 C
16 kV
Reel
Cut Tape
MouseReel
Nhãn hiệu: STMicroelectronics
Điện áp đầu vào: 3.3 V
Điện áp cấp vận hành: 3.3 V
Dòng đầu ra: 80 mA
Sản phẩm: RS-485 Transceivers
Loại sản phẩm: RS-485 Interface IC
Thời gian trễ lan truyền: 12 ns
Tắt: Shutdown
Số lượng Kiện Gốc: 3000
Danh mục phụ: Interface ICs
Loại: Low Power Differential Line Transceiver
Đơn vị Khối lượng: 21 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Mã Tuân Thủ
CNHTS:
8542399000
USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99
Phân loại nguồn gốc
Quốc gia xuất xứ:
Pháp
Quốc gia lắp ráp:
Không Có sẵn
Quốc gia phân phối:
Không Có sẵn
Quốc gia có thể thay đổi tại thời điểm giao hàng.

STR485 RS-485 Line Transceiver

STMicroelectronics STR485 RS-485 Line Transceiver is a low-power differential line transceiver for data transmission standard RS-485 applications in half-duplex mode. Data and enable signals are compatible with 1.8V or 3.3V supplies. Two speeds are selectable through the SLR pin: a fast data rate up to 20Mbps or a slow data rate for an extended cable running to 250kbps. Excessive power dissipation caused by bus contention or faults is prevented by a thermal shutdown circuit that forces the driver outputs into a high impedance state. The STMicroelectronics STR485 RS-485 Line Transceiver has a fail-safe feature, which guarantees a high output state when the inputs are left open, shorted or idle.

Standard Products

STMicroelectronics Standard Products are a broad range of industry-standard and drop-in replacements for the most popular general-purpose analog ICs, discretes, and serial EEPROMs. The Standard Products are manufactured to the highest quality standards with many AECQ-qualified for automotive applications. A comprehensive set of STMicroelectronics design aids, including SPICE, IBIS models, and simulation tools, is available to make adding to a design-in easy.