SIC32309CD-T5E3

Vishay
78-SIC32309CD-T5E3
SIC32309CD-T5E3

Nsx:

Mô tả:
Hot Swap Voltage Controllers 18V 60A 0.6M? RDS(ON) HOT-SWAP EFUSE

Tuổi thọ:
Đơn hàng đặc biệt từ nhà máy:
Nhận báo giá để kiểm tra giá hiện tại, tổng thời gian giao hàng và yêu cầu đặt hàng của nhà sản xuất.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
0

Bạn vẫn có thể mua sản phẩm này bằng đơn hàng dự trữ

Đang đặt hàng:
1,190
Dự kiến 06/03/2026
Thời gian sản xuất của nhà máy:
16
Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Số lượng lớn hơn 1190 sẽ phải tuân thủ các yêu cầu đặt hàng tối thiểu.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$6.04 $6.04
$4.33 $43.30
$4.04 $101.00
$3.55 $355.00
$3.37 $842.50
$3.02 $1,510.00
$2.76 $2,760.00
3,000 Báo giá

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Vishay
Danh mục Sản phẩm: Bộ điều khiển điện áp hoán đổi nóng
RoHS:  
Hot Swap eFuse Switches
70 mA
18 V
4.5 V
- 40 C
+ 125 C
SMD/SMT
MLP32-55
No
Nhãn hiệu: Vishay
Điện áp đầu vào / nguồn cấp - Tối đa: 18 V
Điện áp đầu vào / nguồn cấp - Tối thiểu: 4.5 V
Loại sản phẩm: Hot Swap Voltage Controllers
Sê-ri: SIC32309
Số lượng Kiện Gốc: 3000
Danh mục phụ: PMIC - Power Management ICs
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

SiC32309 Hot-Swap eFuse Switch

The Vishay SiC32309 switch drives up to 60A of continuous current per device. The eFuse switch limits the inrush current to the load when a circuit card is inserted into a live backplane power source, thereby limiting the backplane's voltage drop.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.