FL7701MX

onsemi
512-FL7701MX
FL7701MX

Nsx:

Mô tả:
LED Lighting Driver ICs Smart Non-isolated PFC Buck LED Driver

Bảng dữ liệu:
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,669

Tồn kho:
2,669
Có thể Giao hàng Ngay
Đang đặt hàng:
2,500
Dự kiến 17/07/2026
Thời gian sản xuất của nhà máy:
15
Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$1.56 $1.56
$1.14 $11.40
$1.04 $26.00
$0.918 $91.80
$0.863 $215.75
$0.83 $415.00
$0.822 $822.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)
$0.769 $1,922.50
$0.728 $3,640.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
onsemi
Danh mục Sản phẩm: IC bộ điều khiển chiếu sáng đèn LED
RoHS:  
1 Output
Buck
250 mA
SOIC-8
20 V
20 V
250 kHz
Adjustable
FL7701
- 40 C
+ 125 C
Soft Start
Reel
Cut Tape
MouseReel
Nhãn hiệu: onsemi
Quốc gia Hội nghị: TH
Quốc gia phân phối: US
Quốc gia xuất xứ: TH
Điện áp đầu vào: 20 V
Kiểu gắn: SMD/SMT
Số lượng kênh: 1 Channel
Pd - Tiêu tán nguồn: 660 mW
Loại sản phẩm: LED Lighting Drivers
Số lượng Kiện Gốc: 2500
Danh mục phụ: Driver ICs
Dòng cấp nguồn - Tối đa: 850 uA
Đơn vị Khối lượng: 230.400 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542399000
CAHTS:
8542310000
USHTS:
8542390090
KRHTS:
8542311000
TARIC:
8542319000
MXHTS:
8542310302
ECCN:
EAR99

FL7701MX Low-Power LED Driver

onsemi FL7701MX Low-Power LED Driver is a simple IC with Power Factor Correction (PFC) function. The special "adopted digital" technique of the IC can automatically detect input voltage condition and send an internal reference signal for achieving a high power factor. The FL7701MX driver automatically enables PFC function when an AC input is applied and automatically disables PFC function when DC input is applied. The FL7701MX Low-Power LED driver comes with built-in HV self-biasing supplying circuit. Typical applications include LED lamp for decorative lighting and low-power lighting.

LED Drivers

onsemi LED Drivers simplify design complexity and increase energy efficiency in limited PCB space. These LED drivers offer a total solution for mobile, low-power, and high-power designs. The LED drivers save time, lower system cost, and eliminate unnecessary components. On Semiconductor LED drivers employ topologies that offer industry-leading solutions for every power range. The LED drivers come with good efficiency, rugged reliability, and can be used separately or integrated with the driver.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.