AZ34063UMTR-G1

Diodes Incorporated
621-AZ34063UMTR-G1
AZ34063UMTR-G1

Nsx:

Mô tả:
Switching Voltage Regulators 1.5A Step-Down/Up 3.0V to 36V 180kHz

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 84,924

Tồn kho:
84,924 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 4000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$0.29 $0.29
$0.203 $2.03
$0.18 $4.50
$0.155 $15.50
$0.143 $35.75
$0.136 $68.00
$0.13 $130.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 4000)
$0.12 $480.00
$0.119 $952.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Diodes Incorporated
Danh mục Sản phẩm: Bộ ổn áp chuyển mạch
RoHS:  
SMD/SMT
SOIC-8
Boost, Buck, Inverting
1.25 V to 36 V
1.5 A
1 Output
3 V
36 V
100 uA
180 kHz
- 40 C
+ 85 C
AZ34063
Reel
Cut Tape
MouseReel
Nhãn hiệu: Diodes Incorporated
Nhạy với độ ẩm: Yes
Dòng cấp nguồn vận hành: 4 mA
Loại sản phẩm: Switching Voltage Regulators
Số lượng Kiện Gốc: 4000
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối thiểu: 3 V
Loại: DC/DC Converter
Đơn vị Khối lượng: 74 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

PAM2306 Dual Step-Down DC-DC Converters

Diodes Incorporated offers a wide range of non-isolated DC-DC Converters. These switching voltage regulator converters feature integrated power switches to make designing easier and to minimize component count. With internal or external compensation, the designer can opt for smaller board space and fewer components or select specific inductor and capacitor values. Higher switching frequencies reduce the output ripple current and allow for comparatively smaller inductors (although special attention has to be given to EMI). Overcurrent, overvoltage, and overtemperature protection increase board reliability and prevent premature failures. A Power Good signal, in combination with an Enable pin, can be used for power sequencing and can warn the processor of possible supply problems and shut down in a controller manner. DC-DC converters include buck, boost, buck/boost, external buck, and external boost.