MP4078GS-P

Monolithic Power Systems (MPS)
946-MP4078GS-P
MP4078GS-P

Nsx:

Mô tả:
Switching Voltage Regulators Primary-Side Control , CV Output Single-

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
18 Tuần Thời gian sản xuất tại nhà máy dự kiến.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$1.77 $1.77
$1.30 $13.00
$1.19 $29.75
$1.06 $106.00
$0.991 $247.75
Toàn bộ Cuộn (Đơn hàng theo bội số của 500)
$0.953 $476.50
$0.907 $907.00
$0.88 $2,200.00
$0.871 $4,355.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Monolithic Power Systems (MPS)
Danh mục Sản phẩm: Bộ ổn áp chuyển mạch
RoHS:  
SMD/SMT
Buck-Boost, Flyback
Adjustable
600 mA
1 Output
8.4 V
25 V
- 40 C
+ 125 C
Reel
Cut Tape
Nhãn hiệu: Monolithic Power Systems (MPS)
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: CN
Điện áp đầu vào: 8.4 V to 25 V
Nhạy với độ ẩm: Yes
Loại sản phẩm: Switching Voltage Regulators
Số lượng Kiện Gốc: 500
Danh mục phụ: PMIC - Power Management ICs
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

USHTS:
8542310030
ECCN:
EAR99

MP4078 Single-Stage Offline Controller

Monolithic Power Systems (MPS) MP4078 Single-Stage Offline Controller is designed with active Power Factor Correction (PFC) for constant voltage output applications. This device implements Primary-Side Regulation (PSR) control without requiring a secondary feedback circuit or optocoupler for flyback applications. The MP4078 controller achieves ultra-low standby power consumption typically below 50mW with 230VAC. The Pulse Frequency Modulation (PFM) of the device implements a minimum operating frequency under no-load conditions. The MP4078 controller works in Discontinuous Conduction Mode (DCM) with valley switching for improved efficiency performance. Typical applications include smart LED lighting and front-end pre-regulators.