TPS23521EVM-001

Texas Instruments
595-TPS23521EVM-001
TPS23521EVM-001

Nsx:

Mô tả:
Hot Swap Voltage Controllers TPS23531 Evaluation Module for High Powe DISC-BY-MFG-7/20

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 3

Tồn kho:
3 Có thể Giao hàng Ngay
Số lượng lớn hơn 3 sẽ phải tuân thủ các yêu cầu đặt hàng tối thiểu.
Tối thiểu: 1   Nhiều: 1   Tối đa: 5
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Sản phẩm này được Vận chuyển MIỄN PHÍ

Giá (USD)

Số lượng Đơn giá
Thành tiền
$278.38 $278.38

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ điều khiển điện áp hoán đổi nóng
RoHS:  
PCI Power Management
Programmable
72 V
36 V
1 Channel
1 mA
- 40 C
+ 125 C
SMD/SMT
Nhãn hiệu: Texas Instruments
Loại sản phẩm: Hot Swap Voltage Controllers
Sê-ri: TPS23521-001
Số lượng Kiện Gốc: 1
Danh mục phụ: PMIC - Power Management ICs
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Mã Tuân Thủ
USHTS:
8473301180
ECCN:
EAR99
Phân loại nguồn gốc
Quốc gia xuất xứ:
Hoa Kỳ
Quốc gia lắp ráp:
Không Có sẵn
Quốc gia phân phối:
Không Có sẵn
Quốc gia có thể thay đổi tại thời điểm giao hàng.

TPS23521EVM-001 Controller Evaluation Module

Texas Instruments TPS23521EVM-001 Controller Evaluation Module (EVM) contains evaluation and reference circuitry for the TPS23521. The TPS23521 is a low-side Hotswap controller with a soft start targeted at telecom applications. The Texas Instruments TPS23521EVM-001 gives a jump start for anyone designing a –48V system. It includes input clamping to support lightning surge (up to 2kV), various FET placeholders to support multiple power levels, and an output inductor to mimic any EMI filter before the DC/DC converter.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.