NCP51105ASNT1G

onsemi
863-NCP51105ASNT1G
NCP51105ASNT1G

Nsx:

Mô tả:
Gate Drivers ORDERABLE PART FOR NCP51105A

Tuổi thọ:
Mới tại Mouser
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,942

Tồn kho:
2,942 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
17 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$0.94 $0.94
$0.673 $6.73
$0.607 $15.18
$0.534 $53.40
$0.499 $124.75
$0.478 $239.00
$0.461 $461.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$0.439 $1,317.00
$0.42 $2,520.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
onsemi
Danh mục Sản phẩm: Bộ điều hợp cổng
RoHS:  
Gate Drivers
Single
SMD/SMT
TSOP-6
1 Driver
1 Output
12.7 V
25 V
5 ns
5 ns
- 40 C
+ 125 C
NCP51105A
Reel
Cut Tape
Nhãn hiệu: onsemi
Điện áp đầu vào - Tối đa: 25 V
Điện áp đầu vào - Tối thiếu: 12.7 V
Loại logic: CMOS, TTL
Dòng cấp nguồn vận hành: 700 uA
Pd - Tiêu tán nguồn: 500 mW
Loại sản phẩm: Gate Drivers
Số lượng Kiện Gốc: 3000
Danh mục phụ: PMIC - Power Management ICs
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

USHTS:
8542390090
ECCN:
EAR99

NCP51105 Single 2.6A Low-Side Gate Driver

onsemi NCP51105 Single 2.6A Low-Side Gate Driver is a high-current driver designed to drive power MOSFETs and IGBTs. The logic input is compatible with CMOS and TTL output. The NCP51105 features an OCP pin that provides over-current protection with negative voltage detected across a switching current sensing resistor and an EN pin that can report faults status to an external controller such as an MCU. The EN pin must be pulled up to a higher voltage than the threshold for normal operation and pulled down to disable output in all fault conditions. Internal VDD circuitry provides an under-voltage lockout function by holding the output low until the supply voltage is recovered into the operating range, and the fault recovery time can be programmable by a time-constant set of resistance and capacitance connected to the EN pin.