AP8803WTG-7

Diodes Incorporated
621-AP8803WTG-7
AP8803WTG-7

Nsx:

Mô tả:
LED Lighting Driver ICs BUCK LED DRIVER 30V 3W

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
0

Bạn vẫn có thể mua sản phẩm này bằng đơn hàng dự trữ

Đang đặt hàng:
5,884
Dự kiến 27/07/2026
Thời gian sản xuất của nhà máy:
20
Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$1.37 $1.37
$0.992 $9.92
$0.899 $22.48
$0.797 $79.70
$0.748 $187.00
$0.718 $359.00
$0.69 $690.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$0.66 $1,980.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Diodes Incorporated
Danh mục Sản phẩm: IC bộ điều khiển chiếu sáng đèn LED
RoHS:  
1 Output
Buck
1 A
TSOT-23-5
30 V
8 V
700 kHz
Adjustable
AP8803
- 40 C
+ 105 C
PWM Dimming, Open LED Protection
Reel
Cut Tape
MouseReel
Nhãn hiệu: Diodes Incorporated
Điện áp đầu vào: 8 V to 30 V
Kiểu gắn: SMD/SMT
Số lượng kênh: 1 Channel
Pd - Tiêu tán nguồn: 1 W
Loại sản phẩm: LED Lighting Drivers
Số lượng Kiện Gốc: 3000
Danh mục phụ: Driver ICs
Dòng cấp nguồn - Tối đa: 5 mA
Đơn vị Khối lượng: 6.300 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Mã Tuân Thủ
CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
8542390990
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99
Phân loại nguồn gốc
Quốc gia xuất xứ:
Trung Quốc
Quốc gia lắp ráp:
Không Có sẵn
Quốc gia phân phối:
Không Có sẵn
Quốc gia có thể thay đổi tại thời điểm giao hàng.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

AP8803 Buck LED Driver

The Diodes Inc. AP8803 3W step-down DC/DC converter is designed to drive LEDs with a constant current. The Diodes Inc. AP8803 LED driver can drive up to 7 LEDs, depending on the forward voltage of the LEDs, in series from a voltage source to 8V to 30V. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminating the need for ballast resistors. The Diodes Inc. AP8803 switches at frequency up to 700kHz. This allows the use of small size external components, minimizing the PCB area needed.

AP880xx LED Drivers

The Diodes Inc. AP880xx LED driver IC family significantly reduces the number and size of external components required by drive circuits. These Diodes Inc. step-down DC-DC converter LED drivers require only four smaller and lower cost inductors or capacitors. The AP880xx LED driver family ensures uniform LED brightness, eliminates the need for ballast resistors, and suits a broad range of high-brightness, general illumination duties, including signage, architectural and emergency lighting, and MR16 lamp replacement. Diodes Inc. AP880xx LED driver ICs drive up to 13 series-connected LEDs with a constant current, from voltage sources between 8V and 48V, with efficiencies up to 92%.