TPSI2140QDWQRQ1

Texas Instruments
595-TPSI2140QDWQRQ1
TPSI2140QDWQRQ1

Nsx:

Mô tả:
Solid State Relays - PCB Mount Automotive 1200-V&nb sp;50-mA isola

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 5,655

Tồn kho:
5,655 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$5.61 $5.61
$4.35 $43.50
$4.02 $100.50
$3.65 $365.00
$3.48 $870.00
$3.37 $1,685.00
$3.28 $3,280.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)
$3.27 $6,540.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Rơ-le thể rắn - Chân gắn PCB
RoHS:  
Reel
Cut Tape
MouseReel
SMD/SMT
MOSFET
9 mA
- 40 C
+ 125 C
TPSI2140
Nhãn hiệu: Texas Instruments
Điện áp cách ly: 5.3 kV
Nhạy với độ ẩm: Yes
Pd - Tiêu tán nguồn: 31 mW
Sản phẩm: Automotive Isolated Switch
Loại sản phẩm: SSR - Solid State Relays
Số lượng Kiện Gốc: 2000
Danh mục phụ: Relays
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

TPSI2140-Q1 Automotive Isolated Switch

Texas Instruments TPSI2140-Q1 Automotive Isolated Switch is an isolated solid-state relay (SSR) designed for high-voltage automotive and industrial applications. The TPSI2140-Q1 uses TI's high-reliability capacitive isolation technology in combination with internal back-to-back MOSFETs to form a completely integrated solution requiring no secondary side power supply. The entire primary side of the device requires only 7.5mA of input current, enabling the user to drive both the VDD and EN pins from a single microcontroller GPIO and eliminating the need for an external low-side switch used in photo relay solutions. The user can also choose to connect the VDD pin to a system supply between 5V to 20V and drive the EN pin from a GPIO. The EN pin is fail-safe, preventing any possibility of back powering the VDD supply.