LM5156xH/LM5156xH-Q1 Controller

Texas Instruments LM5156xH/LM5156xH-Q1 Boost/SEPIC/Flyback Controller is a wide input range, non-synchronous boost controller that uses peak current mode control. The device can be used in boost, SEPIC, and flyback topologies. The Texas Instrument LM5156xH/LM5156xH-Q1 can start up from a 1-cell battery with a minimum of 2.97V if the BIAS pin is connected to the VCC pin. It can operate with the input supply voltage as low as 1.5V if the BIAS pin is greater than 3.5V. The LM5156xH-Q1 devices are AEC-Q100 qualified for automotive applications.

Kết quả: 4
Chọn Hình ảnh Số Phụ tùng Nsx Mô tả Bảng dữ liệu Sẵn có Giá (USD) Lọc kết quả trong bảng theo đơn giá dựa trên số lượng của bạn. Số lượng RoHS Mô hình ECAD Dạng cấu hình Số lượng đầu ra Tần số chuyển mạch Hệ số làm việc - Tối đa Điện áp đầu ra Dòng đầu ra Nhiệt độ làm việc tối thiểu Nhiệt độ làm việc tối đa Kiểu gắn Đóng gói / Vỏ bọc Đóng gói

Texas Instruments Switching Controllers 2.2-MHz wide VIN non synchronous boost f 1,686Có hàng
Tối thiểu: 1
Nhiều: 1
Rulo cuốn: 2,000

Boost, Flyback, SEPIC 1 Output 100 kHz to 2.2 MHz 96 % 1.5 V to 300 V 1.5 A - 40 C + 125 C SMD/SMT HTSSOP-14 Reel, Cut Tape, MouseReel

Texas Instruments Switching Controllers 2.2-MHz wide VIN non synchronous boost f 12,804Có hàng
Tối thiểu: 1
Nhiều: 1
Rulo cuốn: 2,000

Boost, Flyback, SEPIC 1 Output 100 kHz to 2.2 MHz 96 % 1.5 V to 300 V 1.5 A - 40 C + 125 C SMD/SMT HTSSOP-14 Reel, Cut Tape, MouseReel

Texas Instruments Switching Controllers 2.2-MHz wide VIN non synchronous boost f 2,015Có hàng
Tối thiểu: 1
Nhiều: 1
Rulo cuốn: 2,000

Boost, Flyback, SEPIC 1 Output 100 kHz to 2.2 MHz 96 % 1.5 V to 300 V 1.5 A - 40 C + 125 C SMD/SMT HTSSOP-14 Reel, Cut Tape, MouseReel

Texas Instruments Switching Controllers 2.2-MHz wide VIN non synchronous boost f 1,535Có hàng
Tối thiểu: 1
Nhiều: 1
Rulo cuốn: 2,000

Boost, Flyback, SEPIC 1 Output 100 kHz to 2.2 MHz 96 % 1.5 V to 300 V 1.5 A - 40 C + 125 C SMD/SMT HTSSOP-14 Reel, Cut Tape, MouseReel