UMFTPD2A

Bridgetek
895-UMFTPD2A
UMFTPD2A

Nsx:

Mô tả:
Programmers - Processor Based FT90 Prog Module FT4232HL USB2.0

Sẵn có

Tồn kho:
0

Bạn vẫn có thể mua sản phẩm này bằng đơn hàng dự trữ

Đang đặt hàng:
14
Dự kiến 03/03/2026
Thời gian sản xuất của nhà máy:
5
Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$33.65 $33.65

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Bridgetek
Danh mục Sản phẩm: Bộ lập trình - Dựa trên bộ xử lý
RoHS:  
Programming Modules
FT90x
RISC
5 V
Nhãn hiệu: Bridgetek
Độ rộng bus dữ liệu: 32 bit
Mô tả/chức năng: FTDI programmer/debugger module
Kích thước: 85.598 mm x 50.55 mm
Để sử dụng với: FT4232HL, MM900EVxA
Loại giao diện: 1-Wire, SPI, UART, USB
Đóng gói: Bulk
Loại sản phẩm: Programmers - Processor Based
Sê-ri: UMFTPD2A
Số lượng Kiện Gốc: 1
Danh mục phụ: Embedded Solutions
Đơn vị Khối lượng: 38.898 g
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8471900000
CAHTS:
8471900000
USHTS:
8471900000
JPHTS:
847190000
KRHTS:
8471900000
TARIC:
8471900000
MXHTS:
8471909900
ECCN:
EAR99

FT90x Series Development Modules

Bridgetek FT90x Series Development Modules include the UMFTPD2A debugger/programmer module, MM900EV1A/2A/3A, and MM900EV LITE development modules. The UMFTPD2A debugger/programmer module provides a USB bridge between the FT90X Eclipse IDE development tools running on a PC and the FT900 1-wire debug pin. The MM900EV provides full hardware feature support for the FT90X processor in a variety of form factors. The MM900EV LITE is a development module for Bridgetek's 32-bit high-performance FT90x Microcontroller family, which is used to develop and demonstrate the functionality of the FT900 Embedded Microcontroller.

UMFTPD2A Debugger/Programmer Module

Bridgetek UMFTPD2A Debugger/Programmer Module provides a USB bridge between the FT90X Eclipse IDE development tools running on a PC and the FT900 1-wire debug pin. This module can be used to program, configure the EFUSE, and debug firmware running on the FT900 device. The UMFTPD2A module features a single-line half-duplex UART signal with no handshake (one-wire interface), one MPSSE interface, one UART interface, and a bit-bang port.