RLDS-P-L15

Amphenol Advanced Sensors
527-RLDS-P-15
RLDS-P-L15

Nsx:

Mô tả:
Level Sensors - Industrial Rope Leak Detection System - Non-Positioning Leakage and Wire Break Detection Module with 15M Cable, LET-PLUS Controller, Power Extension Wire, Lead Cable (3M), Testing cable 15M , wire end connector

Tuổi thọ:
Sản phẩm Mới:
Mới từ nhà sản xuất này.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Amphenol
Danh mục Sản phẩm: Cảm biến mức độ — Chuẩn công nghiệp
RoHS:  
Liquid Leak Detection System
12 VAC/DC
24 VAC, 30 VDC
IP65
LET-PLUS
Nhãn hiệu: Amphenol Advanced Sensors
Nhiệt độ làm việc tối đa: + 70 C
Nhiệt độ làm việc tối thiểu: - 20 C
Loại sản phẩm: Level Controllers
Danh mục phụ: Controllers
Thương hiệu: THERMOMETRICS
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Mã Tuân Thủ
USHTS:
8541600050
Phân loại nguồn gốc
Quốc gia xuất xứ:
Trung Quốc
Quốc gia lắp ráp:
Không Có sẵn
Quốc gia phân phối:
Không Có sẵn
Quốc gia có thể thay đổi tại thời điểm giao hàng.

Cảm biến phát hiện rò rỉ dạng dây

Amphenol Advanced Sensors Rope Leak Detection Sensors were developed to protect critical equipment and infrastructure. These sensors are a reliable solution for continuous monitoring of liquid leaks across large areas. Designed for use in data centers, industrial facilities, telecommunications rooms, and other mission-critical environments, the sensing rope quickly detects the presence of conductive liquids anywhere along its length. The Amphenol Advanced Sensors Rope Leak Detection Sensors' flexible design allows it to be routed around equipment, under raised floors, and along piping to provide early leak detection, helping prevent costly downtime, equipment damage, and maintenance expenses.

Mô-đun báo động LET-Plus

Amphenol Advanced Sensors LET-Plus Alarm Module adopts standard MODBUS-RTU protocol, standard asynchronous serial two-wire RS485 communication port, and the interval between the host computer reading LET-Plus data is not less than 500ms, and the recommended value is 1s. The Amphenol Advanced Sensors LET-Plus factory default device address is 01; the device address can be changed via a host computer command or LEAK-Talk debugging software, and it supports BACnet IP and Modbus RTU/TCP protocols.

Có hàng: 7

Tồn kho:
7 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
6 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Sản phẩm này được Vận chuyển MIỄN PHÍ

Giá (USD)

Số lượng Đơn giá
Thành tiền
$735.37 $735.37
$695.73 $3,478.65
$680.94 $6,809.40