Quay lại Monolithic Power Systems (MPS)

Monolithic Power Systems (MPS) MPQ4228-C Step-Down Converter with Charging Port

Monolithic Power Systems (MPS) MPQ4228-C Step-Down Converter with Charging Port integrates a single USB current-limit switch and a Type-C™ 5V at 3A mode configuration channel for USB ports. The device provides 3A output current across a wide input supply range, achieving excellent load/line regulation. The output on the switch is current-limited.

The USB port on the MPS MPQ4228-C supports charging downstream port (CDP) schemes. The USB port also faciliatates USB Type-C 5V at 3A DFP mode. Fault condition protections include hiccup current limiting, output over-voltage protection (OVP), DP/DM/CC1/CC2 short-to-battery protection, and thermal shutdown (TSD).

The MPQ4228-C is housed in a QFN-22 (4mm x 4mm) package and requires few readily available, standard external components.

Features

  • Supports BC1.2 CDP mode
  • Supports USB Type-C 5V at 3A DFP mode
  • USB_OUT, DP/DM, CC1/CC2 Pins short-to-battery protection
  • Wide 4.2V to 36V continuous operating input range
  • Passes Apple MFI R33 certification test
  • Passes USB-IF Type-C certification test
  • Selectable switching frequency (420kHz and 2.2MHz with spread spectrum)
  • Integrated high bandwidth USB2.0 data switch with OVP
  • Adjustable line drop compensation
  • Accurate 3.55A and 2.85A USB current limit
  • Integrated 20mΩ low RDS(ON) USB switch
  • +145°C internal load-shedding entry temperature
  • EN Shutdown discharge function
  • Fault indication for OCP, OVP, and OTP
  • Frequency synchronization from 200kHz to 2.2MHz
  • Hiccup current limit for both buck and USB
  • OVP for USB switch
  • ±8kV IEC 61000-4-2 Contact discharge ESD rating for CC1 and CC2 pins
  • ±8kV IEC 61000-4-2 Contact discharge ESD rating with external small ESD diodes on DP and DM pins
  • ±15kV IEC 61000-4-2 Air discharge ESD rating for DP, DM, CC1, and CC2 pins
  • Available in a QFN-22 (4mm x 4mm) package with wettable flanks
  • AEC-Q100 Grade 1 available

Applications

  • USB Charging Downstream Ports (CDP)
  • USB Type-C DFP ports
  • USB Hubs

Associated Converters

Monolithic Power Systems (MPS) MPQ4228-Q Step-Down Converter with Charging Port

A single USB current-limit switch and Type-C™ 5V at 3A mode configuration mode for USB port apps.

Learn MoreGiới thiệu về Monolithic Power Systems (MPS) MPQ4228-Q Step-Down Converter with Charging Port View Productsliên quan đến Monolithic Power Systems (MPS) MPQ4228-Q Step-Down Converter with Charging Port

Monolithic Power Systems (MPS) MPQ4228 Buck Converter with USB Charging Port

Integrates a monolithic, step-down switch-mode converter with a single USB current-limit switch.

Learn MoreGiới thiệu về Monolithic Power Systems (MPS) MPQ4228 Buck Converter with USB Charging Port View Productsliên quan đến Monolithic Power Systems (MPS) MPQ4228 Buck Converter with USB Charging Port

Videos

Typical Application

Application Circuit Diagram - Monolithic Power Systems (MPS) MPQ4228-C Step-Down Converter with Charging Port
Performance Graph - Monolithic Power Systems (MPS) MPQ4228-C Step-Down Converter with Charging Port
Đã phát hành: 2023-04-11 | Đã cập nhật: 2023-04-26