Pulse Electronics Small Form Factor Common Mode Chokes

Pulse Electronics Small Form Factor Common Mode Chokes are used for reducing high-frequency conducted noise. These Pulse common mode chokes operate at up to 9A rated current and 80VDC maximum rated voltage between windings. The small form factor common mode chokes have a maximum 7.5mm x 6.5mm footprint and 3.8mm maximum height.

Features

  • 3.8mm (maximum) height
  • A wide range of current/impedance offerings
  • 7.5mm x 6.5mm (maximum) footprint
  • Up to 9A rated current
  • Excellent high-frequency impedance characteristics
  • 80VDC rated voltage (maximum) between windings

Specifications

  • 1.8µH to 9µH inductance
  • 10mΩ to 21mΩ maximum DC resistance
  • 77MHz to 200MHz self-resonant frequency

Mechanical and Schematic Drawings

Mechanical Drawing - Pulse Electronics Small Form Factor Common Mode Chokes
View Results ( 6 ) Page
Mã Phụ tùng Bảng dữ liệu Mô tả Điện cảm Dòng DC tối đa Điện trở DC tối đa Tần số tự cộng hưởng
PA4339.301NLT PA4339.301NLT Bảng dữ liệu Common Mode Chokes / Filters CMC 2.8uH 5A 2.8 uH 5 A 10 mOhms 138 MHz
PA4339.102NLT PA4339.102NLT Bảng dữ liệu Common Mode Chokes / Filters CMC 8.0uH 3A 8 uH 3 A 17 mOhms 93 MHz
PA4339.501NLT PA4339.501NLT Bảng dữ liệu Common Mode Chokes / Filters CMC 4.0uH 5A 4 uH 5 A 10 mOhms 124 MHz
PA4339.101NLT PA4339.101NLT Bảng dữ liệu Common Mode Chokes / Filters CMC 1.8uH 9A 1.8 uH 9 A 10 mOhms 200 MHz
PA4339.132NLT PA4339.132NLT Bảng dữ liệu Common Mode Chokes / Filters CMC 9.0uH 2.5A 9 uH 2.5 A 21 mOhms 77 MHz
PA4339.701NLT PA4339.701NLT Bảng dữ liệu Common Mode Chokes / Filters CMC 5.0uH 4A 5 uH 4 A 15 mOhms 108 MHz
Đã phát hành: 2018-10-12 | Đã cập nhật: 2022-11-09