ADM3095EARZ

Analog Devices
584-ADM3095EARZ
ADM3095EARZ

Nsx:

Mô tả:
RS-485 Interface IC Level 4 EMC Protected RS-485 Transceiver with Full 42 V Fault Protection

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 86

Tồn kho:
86 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
26 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$14.27 $14.27
$11.22 $112.20
$10.19 $254.75
$8.91 $855.36
$8.64 $2,488.32
$8.45 $4,461.60
$8.28 $8,346.24

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Analog Devices Inc.
Danh mục Sản phẩm: IC giao diện RS-485
RoHS:  
SMD/SMT
SOIC-16
ADM3095E
Transceiver
2.5 Mb/s
1 Driver
1 Receiver
Half Duplex
5.5 V
3 V
90 mA
- 40 C
+ 85 C
30 kV
Tube
Nhãn hiệu: Analog Devices
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: PH
Bộ công cụ phát triển: EVAL-ADM3095E
Điện áp đầu vào: 1.62 V to 5.5 V
Điện áp cấp vận hành: 3 V to 5.5 V
Loại đầu ra: Differential
Điện áp đầu ra: 1.5 V to 5 V
Pd - Tiêu tán nguồn: 400 mW
Sản phẩm: RS-485 Transceivers
Loại sản phẩm: RS-485 Interface IC
Thời gian trễ lan truyền: 35 ns, 120 ns
Tắt: Shutdown
Số lượng Kiện Gốc: 48
Danh mục phụ: Interface ICs
Loại: Transceiver
Đơn vị Khối lượng: 156 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

ADM3095E RS-485 Transceivers

Analog Devices Inc. ADM3095E Transceivers are completely integrated electromagnetic compatibility (EMC) protected RS-485 transceivers. The design combines overvoltage fault protection, surge protection, EFT protection, ESD protection, and an extended common-mode input voltage range. These 3V to 5.5V, 2.5Mbps, RS-485 transceivers offer up to ±42V AC/DC peak bus overvoltage fault protection on the RS-485 bus pins. In addition, the transceivers provide IEC 61000-4-4 Level 4 EFT protection up to ±2kV, and IEC 61000-4-2 Level 4 ESD protection on the bus pins. These protection features allow the ADM3095E devices to withstand up to ±15kV on the transceiver interface pins without latch-up or damage. Analog Devices ADM3095E RS-485 Transceivers have an extended common-mode input voltage range of ±25V. The extended common-mode input voltage range enables the ADM3095E to improve data communication reliability in noisy environments over long cable lengths with ground loop voltages.