PAC1711T-2E/9Q

Microchip Technology
579-PAC1711T-2E/9Q
PAC1711T-2E/9Q

Nsx:

Mô tả:
Current & Power Monitors & Regulators 12 Bit, 42V, with Powerdown, 10 pin

Tuổi thọ:
Sản phẩm Mới:
Mới từ nhà sản xuất này.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
Tối thiểu: 5000   Nhiều: 5000
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
Toàn bộ Cuộn (Đơn hàng theo bội số của 5000)
$0.675 $3,375.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Microchip
Danh mục Sản phẩm: Bộ giám sát và bộ ổn định dòng & nguồn
Power Monitor with Accumulator
High or Low Side
5.5 V
2.7 V
200 uA
1 %
- 40 C
+ 125 C
SMD/SMT
VDFN-10
Reel
Nhãn hiệu: Microchip Technology
Bộ công cụ phát triển: PAC1711 Click
Loại sản phẩm: Current & Power Monitors & Regulators
Số lượng Kiện Gốc: 5000
Danh mục phụ: PMIC - Power Management ICs
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

USHTS:
8542390090
ECCN:
EAR99

PAC1711 Single-Channel Power Monitor

Microchip PAC1711 Single-Channel Power Monitor is a single-channel energy monitor with a bus-voltage monitor and a current-sense amplifier that feeds a single 12-bit-resolution ADC. The device is designed for high-side current sensing, and the digital circuitry performs power calculations and energy accumulation. This feature enables energy monitoring with integration periods up to one year or longer. The system host or embedded controller can retrieve sense resistor voltage, bus voltage, and accumulated proportional power from registers. The device includes an alert system that generates alerts when it detects voltage, current, or power excursions with up to two alert pins. The sampling rate and energy integration period can be controlled over I2C or SMBus. One-shot measurements and other controls can also be configured via SMBus or I2C. The Microchip PAC1711 uses real-time calibration to minimize offset error. No input filters are required for this device. Built-in adjustable averaging delivers very low-noise, high-resolution measurement results.