MP3364GR-P

Monolithic Power Systems (MPS)
946-MP3364GR-P
MP3364GR-P

Nsx:

Mô tả:
LED Lighting Driver ICs 4-Channel, Max.150mA/Ch Boost WLED Driver with 15000:1 Dim Ratio and I2C

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 50

Tồn kho:
50
Có thể Giao hàng Ngay
Đang đặt hàng:
500
Dự kiến 17/04/2026
Thời gian sản xuất của nhà máy:
18
Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$2.80 $2.80
$2.09 $20.90
$1.91 $47.75
$1.63 $407.50
Toàn bộ Cuộn (Đơn hàng theo bội số của 500)
$1.56 $780.00
$1.49 $1,490.00
$1.45 $3,625.00
$1.43 $7,150.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Monolithic Power Systems (MPS)
Danh mục Sản phẩm: IC bộ điều khiển chiếu sáng đèn LED
RoHS:  
4 Output
Boost
150 mA
QFN-24
36 V
3.5 V
2.2 MHz
600 mV to 36 V
MP3364
- 40 C
+ 125 C
PWM Dimming, Open LED Protection
Reel
Cut Tape
Nhãn hiệu: Monolithic Power Systems (MPS)
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: CN
Làm mờ: PWM
Điện áp đầu vào: 3.5 V to 36 V
Kiểu gắn: SMD/SMT
Số lượng kênh: 4 Channel
Pd - Tiêu tán nguồn: 2.97 W
Sản phẩm: WLED Drivers
Loại sản phẩm: LED Lighting Drivers
Số lượng Kiện Gốc: 500
Danh mục phụ: Driver ICs
Dòng cấp nguồn - Tối đa: 5 mA
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

MP3364 4-Channel Boost WLED Driver

Monolithic Power Systems (MPS) MP3364 4-Channel Boost WLED Driver is a step-up converter with four-channel current sources. The device is designed to drive white LED arrays as backlighting for small- or medium-sized LCD panels. The device uses peak current mode as its PWM control architecture to regulate the boost converter. Four-channel current sources are applied to the LED cathode to adjust the LED brightness. The MP3364 regulates the current in each LED string to the value set by an external current setting resistor, with 2.5% current regulation accuracy between strings.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.