ST490ABDR

STMicroelectronics
511-ST490ABDR
ST490ABDR

Nsx:

Mô tả:
RS-422/RS-485 Interface IC Hi-Spd Lo Pwr Trans

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 3,320

Tồn kho:
3,320 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
13 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$2.56 $2.56
$1.80 $18.00
$1.63 $40.75
$1.42 $142.00
$1.34 $335.00
$1.22 $610.00
$1.05 $1,050.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)
$0.968 $2,420.00
$0.947 $4,735.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
STMicroelectronics
Danh mục Sản phẩm: IC giao diện RS-422/RS-48
RoHS:  
ST490AB
SMD/SMT
SOIC-8
Transceiver
1 Driver
1 Receiver
50 Mb/s
7 V
7 V
- 40 C
+ 85 C
Reel
Cut Tape
MouseReel
Nhãn hiệu: STMicroelectronics
Song công: Full Duplex
Dòng cấp nguồn vận hành: 5 mA
Điện áp cấp vận hành: 5 V
Loại sản phẩm: RS-422/RS-485 Interface IC
Số lượng Kiện Gốc: 2500
Danh mục phụ: Interface ICs
Đơn vị Khối lượng: 506.600 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
8542390990
TARIC:
8542399000
MXHTS:
85423999
ECCN:
EAR99

Standard Products

STMicroelectronics Standard Products are a broad range of industry-standard and drop-in replacements for the most popular general-purpose analog ICs, discretes, and serial EEPROMs. The Standard Products are manufactured to the highest quality standards with many AECQ-qualified for automotive applications. A comprehensive set of STMicroelectronics design aids, including SPICE, IBIS models, and simulation tools, is available to make adding to a design-in easy.

Low-Power High-Speed Transceivers

STMicroelectronics Low-Power, High-Speed Transceivers are designed for RS-485, RS-422, and RS-423 communication applications. They usually contain one driver and one receiver in a half-duplex configuration. Each driver output and receiver input is protected against electrostatic discharge up to ±15kV and has no latch-up. These STMicroelectronics Low-Power, High-Speed Transceivers operate with a 5V supply and draw a very low supply current when unloaded or fully loaded but with disabled drivers. A SERCOS interface controller for industrial control systems enables real-time communication via optical fiber rings, RS-485 rings, and RS-485 buses.