STM706RM6F

STMicroelectronics
511-STM706RM6F
STM706RM6F

Nsx:

Mô tả:
Supervisory Circuits 4.38V Reset Suprvsr

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 4,446

Tồn kho:
4,446 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
16 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$1.14 $1.14
$0.821 $8.21
$0.742 $18.55
$0.655 $65.50
$0.614 $153.50
$0.589 $294.50
$0.568 $568.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)
$0.534 $1,335.00
$0.492 $3,690.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
STMicroelectronics
Danh mục Sản phẩm: Mạch giám sát
RoHS:  
Voltage Supervisory
SMD/SMT
SOIC-8
4.4 V
1 Input
Active Low, Push-Pull
Manual Reset
Watchdog
No Backup
200 ms
5.5 V
- 40 C
+ 85 C
STM706T/S/R
Reel
Cut Tape
MouseReel
Nhãn hiệu: STMicroelectronics
Tín hiệu hỗ trợ chip: No Chip Enable
Dòng cấp nguồn vận hành: 40 uA
Ngưỡng quá áp: 2.7 V
Pd - Tiêu tán nguồn: 320 mW
Phát hiện lỗi nguồn: Yes
Loại sản phẩm: Supervisory Circuits
Số lượng Kiện Gốc: 2500
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối thiểu: 1 V
Ngưỡng điện áp thiếu: 2.55 V
Đơn vị Khối lượng: 506.600 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
8542390990
TARIC:
8542399000
MXHTS:
85423999
ECCN:
EAR99

STM705/706/708/813L Supervisors

STMicroelectronics STM705/706/708/813L Supervisors are self-contained devices which provide microprocessor supervisory functions. A precision voltage reference and comparator monitors the VCC input for an out-of-tolerance condition. When an invalid VCC condition occurs, the reset output (RST) is forced low (or high in the case of RST). These devices also offer a watchdog timer (except for STM707/708) as well as a power-fail comparator to provide the system with an early warning of impending power failure. 

Standard Products

STMicroelectronics Standard Products are a broad range of industry-standard and drop-in replacements for the most popular general-purpose analog ICs, discretes, and serial EEPROMs. The Standard Products are manufactured to the highest quality standards with many AECQ-qualified for automotive applications. A comprehensive set of STMicroelectronics design aids, including SPICE, IBIS models, and simulation tools, is available to make adding to a design-in easy.