STPW12PHR

STMicroelectronics
511-STPW12PHR
STPW12PHR

Nsx:

Mô tả:
Hot Swap Voltage Controllers Programmable electronic power breaker for 12V bus

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
24 Tuần Thời gian sản xuất tại nhà máy dự kiến.
Tối thiểu: 2500   Nhiều: 2500
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)
$1.43 $3,575.00
$1.40 $7,000.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
STMicroelectronics
Danh mục Sản phẩm: Bộ điều khiển điện áp hoán đổi nóng
RoHS:  
Controllers & Switches
1.5 A
18 V
10.5 V
1 Channel
4 mA
- 40 C
+ 125 C
SMD/SMT
SOIC-8
Reel
No
Nhãn hiệu: STMicroelectronics
Điện áp đầu vào / nguồn cấp - Tối đa: 18 V
Điện áp đầu vào / nguồn cấp - Tối thiểu: 10.5 V
Nhạy với độ ẩm: Yes
Loại sản phẩm: Hot Swap Voltage Controllers
Sê-ri: STPW12
Số lượng Kiện Gốc: 2500
Danh mục phụ: PMIC - Power Management ICs
Đơn vị Khối lượng: 79.520 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542319090
USHTS:
8542390090
ECCN:
EAR99

STPW12 Programmable Electronic Power Breaker

STMicroelectronics STPW12 Programmable Electronic Power Breaker for 12V bus is an integrated electronic power breaker, optimized to monitor input power. This controller is connected in series to the power-rail to disconnect the electronic circuitry on its output if the power consumption overcomes the programmed limit. When this happens, the device automatically opens the integrated power switch and disconnects the load. The STPW12 electronic power breaker features thermal shutdown, under-voltage lockout, adjustable power limitation, real-time input power sensing, and PWM mode. Typical applications include white goods, consumer electronics, industrial, air-conditioner, user interface, and fan motor control.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.