ADC32RF83IRRHR

Texas Instruments
595-ADC32RF83IRRHR
ADC32RF83IRRHR

Nsx:

Mô tả:
Analog Front End - AFE Dual-channel 14-bit 3-GSPS single DDC AD ADC32RF83IRRHT

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
18 Tuần Thời gian sản xuất tại nhà máy dự kiến.
Tối thiểu: 1500   Nhiều: 1500
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
Toàn bộ Cuộn (Đơn hàng theo bội số của 1500)
$1,665.95 $2,498,925.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Mạch sơ bộ analog - AFE
RoHS:  
ADC32RF83
14 bit
3000 MS/s
2 Channel
SPI
2 V
1.8 V
- 40 C
+ 85 C
SMD/SMT
VQFN-72
Reel
Điện áp nguồn cấp analog: 1.1 V to 1.25 V
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: Not Available
Bộ công cụ phát triển: ADC32RF80EVM
Điện áp nguồn cấp kỹ thuật số: 1.1 V to 1.2 V
Nhạy với độ ẩm: Yes
Pd - Tiêu tán nguồn: 6.54 W
Tiêu thụ điện năng: 6.4 W
Sản phẩm: Telecom Receivers
Loại sản phẩm: Analog Front End - AFE
SNR - Tỷ lệ tín hiệu trên nhiễu: 61.1 dB
Số lượng Kiện Gốc: 1500
Danh mục phụ: Data Converter ICs
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

USHTS:
8542390070
ECCN:
5A991.b

ADC32RF8x Wideband Receiver & Feedback IC

Texas Instruments ADC32RF8x Wideband Receiver & Feedback IC is a 14-bit, 3GSPS, dual-channel telecom receiver and feedback device family that supports RF sampling with input frequencies up to 4GHz and beyond. The ADC32RF8x is designed for high signal-to-noise ratio (SNR) and delivers a noise spectral density of –155dBFS/Hz as well as dynamic range and channel isolation over a large input frequency range. The buffered analog input with on-chip termination provides uniform input impedance across a wide frequency range and minimizes sample-and-hold glitch energy. Each channel can be connected to a dual-band, digital down-converter (DDC) with up to three independent, 16-bit numerically controlled oscillators (NCOs) per DDC for phase-coherent frequency hopping. Additionally, the ADC is equipped with front-end peak and RMS power detectors and alarm functions to support external automatic gain control (AGC) algorithms.