AFE4300PNR

Texas Instruments
595-AFE4300PNR
AFE4300PNR

Nsx:

Mô tả:
Analog Front End - AFE Weigh Scale/Body Com p AFE A 595-AFE4300 A 595-AFE4300PN

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 216

Tồn kho:
216 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
18 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 1000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$32.15 $32.15
$26.03 $260.30
$24.50 $612.50
$22.83 $2,283.00
$22.03 $5,507.50
$21.58 $10,790.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 1000)
$19.79 $19,790.00
5,000 Báo giá
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Tray
Sẵn có:
Có hàng
Giá:
$35.87
Tối thiểu:
1

Sản phẩm Tương tự

Texas Instruments AFE4300PN
Texas Instruments
Analog Front End - AFE Weigh Scale/Body Com p AFE A 595-AFE4300 A 595-AFE4300PNR

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Mạch sơ bộ analog - AFE
RoHS:  
AFE4300
16 bit
3.6 V
2 V
0 C
+ 70 C
SMD/SMT
LQFP-80
Reel
Cut Tape
MouseReel
Điện áp nguồn cấp analog: 2 V to 3.6 V
Nhãn hiệu: Texas Instruments
Nhạy với độ ẩm: Yes
Loại sản phẩm: Analog Front End - AFE
Số lượng Kiện Gốc: 1000
Danh mục phụ: Data Converter ICs
Đơn vị Khối lượng: 640 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

AFE4300 Analog Front End

Texas Instruments AFE4300 Analog Front End incorporates two separate signal chains for weight-scale measurement and body composition measurement analysis. A 16-bit, 860-SPS analog-to-digital converter is multiplexed between both chains. The weight measurement chain of the TI AFE includes an instrumentation amplifier with the gain set by an external resistor, followed by a 6-bit digital-to-analog converter for offset correction, and a circuit to drive the external bridge/load cell with a fixed 1.7V for ratiometric measurements. AFE4300 can also measure body composition by applying a sinusoidal current into the body. The sinusoidal current is generated with an internal pattern generator and a 6-bit, 1-MSPS DAC. A voltage-to-current converter applies this sinusoidal current into the body, between two terminals. The voltage created across these two terminals as a result of the impedance of the body is measured back with a differential amplifier, rectified, and its amplitude is extracted and measured by the 16-bit ADC.