DRV401AIRGWT

595-DRV401AIRGWT
DRV401AIRGWT

Nsx:

Mô tả:
Sensor Interface Sensor Sig Condition ing A 595-DRV401AIR A 595-DRV401AIRGWR

Tuổi thọ:
Hết hạn sử dụng:
Nhà sản xuất đã lên kế hoạch ngừng và sẽ không sản xuất nữa.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 10

Tồn kho:
10 Có thể Giao hàng Ngay
Số lượng lớn hơn 10 sẽ phải tuân thủ các yêu cầu đặt hàng tối thiểu.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 250)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$7.63 $7.63
$5.88 $58.80
$5.44 $136.00
$4.96 $496.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 250)
$4.73 $1,182.50
$4.59 $2,295.00
$4.48 $4,480.00
$4.36 $10,900.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Reel, Cut Tape, MouseReel
Sẵn có:
Có hàng
Giá:
$5.77
Tối thiểu:
1

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Giao diện cảm biến
RoHS:  
Sensor Interface
Serial, 4-Wire, SPI
5.5 V
4.5 V
6.8 mA
- 40 C
+ 125 C
SMD/SMT
VQFN-20
Reel
Cut Tape
MouseReel
Nhãn hiệu: Texas Instruments
Đặc điểm nổi bật: AFE for Magnetic Current Sensing
Nhạy với độ ẩm: Yes
Điện áp cấp vận hành: 5 V
Loại đầu ra: Open-Drain
Loại sản phẩm: Sensor Interface
Điện áp chuẩn: 2.5 V
Sê-ri: DRV401
Số lượng Kiện Gốc: 250
Danh mục phụ: Interface ICs
Đơn vị Khối lượng: 70 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542319090
CAHTS:
8542390000
USHTS:
8542310030
JPHTS:
8542390990
MXHTS:
8542330299
ECCN:
EAR99

DRV401/DRV401-Q1 Sensor Signal Conditioning IC

Texas Instruments DRV401/DRV401-Q1 Magnetic Sensor Signal Conditioning IC is fully qualified for automotive applications and is suitable for motor control drive and battery monitoring systems. When used with a magnetic sensor, the DRV401/DRV401-Q1 monitors AC and DC currents to high accuracy. Provided functions include probe excitation, signal conditioning of the probe signal, signal loop amplifier, an H-bridge driver for the compensation coil, and an analog signal output stage that provides an output voltage proportional to the primary current. This device offers overload, fault detection, and transient noise suppression. The Texas Instruments DRV401/DRV401-Q1 directly drives the compensation coil or connects to external power drivers. Therefore, the DRV401/DRV401-Q1 combines with sensors to measure small to large currents. The DRV401-Q1 devices are AEC-Q100 qualified for automotive applications.