DRV421RTJT

595-DRV421RTJT
DRV421RTJT

Nsx:

Mô tả:
Board Mount Current Sensors Integrated Fluxgate Magnetic Sensor IC f DISC-BY-MFG-01/26

Tuổi thọ:
Hết hạn sử dụng:
Nhà sản xuất đã lên kế hoạch ngừng và sẽ không sản xuất nữa.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 342

Tồn kho:
342 Có thể Giao hàng Ngay
Số lượng lớn hơn 342 sẽ phải tuân thủ các yêu cầu đặt hàng tối thiểu.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 250)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$7.89 $7.89
$7.12 $35.60
$6.83 $68.30
$6.49 $162.25
$6.26 $313.00
$5.86 $586.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 250)
$5.86 $1,465.00
$5.60 $2,800.00
$5.44 $5,440.00
2,500 Báo giá
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Cảm biến dòng gắn bo mạch
RoHS:  
250 mA
Closed Loop
2 %
5.5 V
Analog - Current
Nhãn hiệu: Texas Instruments
Chiều cao: 0.8 mm
Chiều dài: 4.15 mm
Nhiệt độ làm việc tối đa: + 125 C
Nhiệt độ làm việc tối thiểu: - 40 C
Nhạy với độ ẩm: Yes
Đóng gói / Vỏ bọc: QFN-20
Đóng gói: Reel
Đóng gói: Cut Tape
Đóng gói: MouseReel
Loại sản phẩm: Board Mount Current Sensors
Sê-ri: DRV421
Số lượng Kiện Gốc: 250
Danh mục phụ: Sensors
Chiều rộng: 4.15 mm
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542391000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

DRV421 Closed-Loop Current Sensing IC

Texas Instruments DRV421 Closed-Loop Current Sensing IC is designed for magnetic closed-loop current sensing solutions. This enables isolated, precise dc- and ac-current measurements. This provides both, a proprietary integrated fluxgate sensor, and the required analog signal conditioning, thus minimizing component count and cost. The low offset and drift of the fluxgate sensor, along with an optimized front-end circuit results in unrivaled measurement precision. This device provides all the necessary circuit blocks to drive the current-sensing feedback loop. The sensor front-end circuit is followed by a filter that can be configured to work with a wide range of magnetic cores. The integrated 250mA H-Bridge drives the compensation coil while doubling the current measurement range, compared to conventional single-ended drive methods. The device also provides a precision voltage reference and shunt sense amplifier. This allows the device to generate and drive the analog output signal.