DRV8313RHH

Texas Instruments
595-DRV8313RHH
DRV8313RHH

Nsx:

Mô tả:
Motor / Motion / Ignition Controllers & Drivers DRV8313 A 595-DRV831 3RHHR A 595-DRV8313 A 595-DRV8313RHHR

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 249

Tồn kho:
249 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
18 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$6.24 $6.24
$4.79 $47.90
$4.16 $104.00
$3.98 $477.60
$3.79 $1,137.00
$3.71 $2,003.40
$3.62 $3,692.40
$3.52 $8,870.40

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Reel, Cut Tape, MouseReel
Sẵn có:
Có hàng
Giá:
$4.26
Tối thiểu:
1

Sản phẩm Tương tự

Texas Instruments DRV8313RHHR
Texas Instruments
Motor / Motion / Ignition Controllers & Drivers DRV8313 A 595-DRV831 3RHH A 595-DRV8313R A 595-DRV8313RHH

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ điều khiển & mạch điều khiển động cơ / chuyển động / đánh lửa
RoHS:  
Brushless DC Motor Controllers
Half Bridge
2.5 A
1 mA
- 40 C
+ 125 C
SMD/SMT
VQFN-36
Tube
Nhãn hiệu: Texas Instruments
Định mức điện áp tải: 8 V to 60 V
Nhạy với độ ẩm: Yes
Số lượng đầu ra: 3 Output
Tần số vận hành: 250 kHz
Loại sản phẩm: Motor / Motion / Ignition Controllers & Drivers
Sê-ri: DRV8313
Số lượng Kiện Gốc: 60
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối đa: 60 V
Điện áp cấp nguồn - Tối thiểu: 8 V
Đơn vị Khối lượng: 104.400 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542310030
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

DRV8313 Triple Half-H-Bridge Driver

Texas Instruments DRV8313 Triple Half-H-Bridge Driver provides three individually controllable half-H-bridge drivers. It is intended to drive a three-phase brushless dc motor, though it can also be used to drive solenoids or other loads. Each output driver channel consists of N-channel power MOSFETs configured in a half-H-bridge configuration. The design brings the ground terminals of each driver to pins, to allow one to perform current sensing on each output. Current-limit circuitry or other functions are possible uses of an uncommitted comparator. The DRV8313 can supply up to 2.5A peak or 1.75A RMS output current per channel (with proper PCB heatsinking at 24V and 25°C) per half-H-bridge. The device provides internal shutdown functions for overcurrent protection, short-circuit protection, under-voltage lockout, and overtemperature. The DRV8313 comes in a 28-pin HTSSOP PowerPAD package.