DRV8428EPWPR

Texas Instruments
595-DRV8428EPWPR
DRV8428EPWPR

Nsx:

Mô tả:
Motor / Motion / Ignition Controllers & Drivers 35-V 1-A bipolar st epper or dual brushe

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 5,584

Tồn kho:
5,584 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
6 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$2.75 $2.75
$2.05 $20.50
$1.87 $46.75
$1.68 $168.00
$1.59 $397.50
$1.53 $765.00
$1.49 $1,490.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$1.31 $3,930.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ điều khiển & mạch điều khiển động cơ / chuyển động / đánh lửa
RoHS:  
Brushed DC Motor Drivers
Half Bridge
700 mA
3.8 mA
- 40 C
+ 125 C
SMD/SMT
Reel
Cut Tape
MouseReel
Nhãn hiệu: Texas Instruments
Nhạy với độ ẩm: Yes
Loại sản phẩm: Motor / Motion / Ignition Controllers & Drivers
Sê-ri: DRV8428E
Số lượng Kiện Gốc: 3000
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối đa: 33 V
Điện áp cấp nguồn - Tối thiểu: 4.2 V
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542391000
USHTS:
8542390070
ECCN:
EAR99

DRV8428E/DRV8428P Dual H-Bridge Motor Drivers

Texas Instruments DRV8428E/DRV8428P Dual H-Bridge Motor Drivers are dual H-bridge motor drivers for various industrial applications. The devices can drive two DC motors or a bipolar stepper motor. The Texas Instruments DRV8428E/DRV8428P can drive up to 1A full-scale or 0.7A RMS output current (dependent on PCB design). The output stage of the driver consists of N-channel power MOSFETs configured as two full H-bridges, current sensing and regulation, and protection circuitry. The integrated current sensing uses an internal current mirror architecture, removing the need for a large power shunt resistor. This feature saves the board area and reduces system costs. A low-power sleep mode is provided to achieve an ultra-low quiescent current draw by shutting down most of the internal circuitry. Internal protection features are provided for supply undervoltage lockout (UVLO), output overcurrent (OCP), and device overtemperature (TSD).