DRV8847PWPRG4

Texas Instruments
595-DRV8847PWPRG4
DRV8847PWPRG4

Nsx:

Mô tả:
Motor / Motion / Ignition Controllers & Drivers 18-V 2-A dual H-bri dge motor driver wit

Tuổi thọ:
Sản phẩm Mới:
Mới từ nhà sản xuất này.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 1,990

Tồn kho:
1,990 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$4.31 $4.31
$2.86 $28.60
$2.62 $65.50
$2.25 $225.00
$2.14 $535.00
$1.92 $960.00
$1.62 $1,620.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)
$1.57 $3,140.00
$1.54 $6,160.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ điều khiển & mạch điều khiển động cơ / chuyển động / đánh lửa
RoHS:  
Gate Driver
2.7 V to 20 V
1 A
3.5 mA
- 40 C
+ 125 C
SMD/SMT
HTSSOP-16
Reel
Cut Tape
Nhãn hiệu: Texas Instruments
Bộ công cụ phát triển: DRV8847EVM
Nhạy với độ ẩm: Yes
Tần số vận hành: 250 kHz
Loại sản phẩm: Motor / Motion / Ignition Controllers & Drivers
Sê-ri: DRV8847
Số lượng Kiện Gốc: 2000
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối đa: 20 V
Điện áp cấp nguồn - Tối thiểu: 2.7 V
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

DRV8847 Dual H-Bridge Motor Drivers

Texas Instruments DRV8847 Dual H-Bridge Motor Drivers are for industrial applications, home appliances, ePOS printers, and other mechatronic applications. These devices can be used for driving two DC motors, a bipolar stepper motor, or other loads such as relays. A simple PWM interface allows for an easy interface with the controller. The DRV8847 drivers operate off a single power supply and support a wide input supply range from 2.7 to 18V. The output stage of the driver consists of N-channel power MOSFETs configured as two full H-bridges to drive motor windings or four independent half bridges (in an independent bridge interface). A fixed-off time controls the peak current in the bridge, which can drive a 1A load (2A in parallel mode with proper heat sinking at 25°C TA).