INA241B3QDGSRQ1

Texas Instruments
595-INA241B3QDGSRQ1
INA241B3QDGSRQ1

Nsx:

Mô tả:
Current Sense Amplifiers AEC-Q100 -4V to 110 V bidirectional high

Tuổi thọ:
Sản phẩm Mới:
Mới từ nhà sản xuất này.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,500

Tồn kho:
2,500 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$4.51 $4.51
$3.00 $30.00
$2.77 $69.25
$2.41 $241.00
$2.28 $570.00
$2.05 $1,025.00
$1.73 $1,730.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)
$1.67 $4,175.00
$1.64 $8,200.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ khuếch đại cảm biến dòng
RoHS:  
INA241B
1 Channel
- 5 V to 100 V
150 dB
35 uA
150 uV
20 V
2.7 V
3.2 mA
0.1 %
- 40 C
+ 125 C
SMD/SMT
VSSOP-10
Reel
Cut Tape
Băng thông 3 dB: 1100 kHz
Loại bộ khuếch đại: Bidirectional Current Sense Amplifier
Nhãn hiệu: Texas Instruments
Bộ công cụ phát triển: INA241AEVM
vn - Mật độ nhiễu điện áp đầu vào: 39 nV/sqrt Hz
Độ khuếch đại V/V: 50 V/V
Loại đầu ra: Analog
Sản phẩm: Current Sense Amplifiers
Loại sản phẩm: Current Sense Amplifiers
PSRR - Tỷ lệ loại bỏ nguồn cấp: 10 uV/V
Thời gian thiết lập: 1 us
Tắt: No Shutdown
SR - Tốc độ quét: 8 V/us
Số lượng Kiện Gốc: 2500
Danh mục phụ: Amplifier ICs
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CAHTS:
8542330000
USHTS:
8542330001
MXHTS:
8542330299
ECCN:
EAR99

INA241x/INA241x-Q1 Current Sense Amplifiers

Texas Instruments INA241x/INA241x-Q1 Current Sense Amplifiers are ultra-precise, bidirectional current sense amplifiers that can measure voltage drops across shunt resistors. This measurement is done over a wide common-mode range from -5V to 110V, independent of the supply voltage. The high-precision current measurement is achieved through a combination of small gain error (±0.01%, maximum), low offset voltage (±10µV, max), and a high DC CMRR (typical 166dB). The Texas Instruments INA241x/INA241x-Q1 is designed for high-voltage, bidirectional measurements in switching systems that see large common-mode voltage transients at the device’s inputs. The enhanced PWM rejection circuitry inside the INA241x/INA241x-Q1 ensures minimal signal disturbance at the output due to the common-mode voltage transitions at the input. The INA241x-Q1 devices are AEC-Q100 qualified for automotive applications.