LM3402MM/NOPB

Texas Instruments
926-LM3402MM/NOPB
LM3402MM/NOPB

Nsx:

Mô tả:
LED Lighting Driver ICs 0.5A CONSTANT CRNT B UCK REG A 926-LM340 A 926-LM3402MMX/NOPB

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 3,839

Tồn kho:
3,839 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 1000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$2.39 $2.39
$1.78 $17.80
$1.63 $40.75
$1.46 $146.00
$1.37 $342.50
$1.33 $665.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 1000)
$1.28 $1,280.00
$1.23 $2,460.00
$1.21 $6,050.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: IC bộ điều khiển chiếu sáng đèn LED
RoHS:  
1 Output
Buck
500 mA
VSSOP-8
42 V
6 V
10 kHz to 1 MHz
40 V
LM3402
- 40 C
+ 125 C
PWM Dimming, Constant Current
Reel
Cut Tape
MouseReel
Nhãn hiệu: Texas Instruments
Làm mờ: PWM
Điện áp đầu vào: 6 V to 42 V
Kiểu gắn: SMD/SMT
Số lượng kênh: 1 Channel
Loại đầu ra: Constant Current
Sản phẩm: LED Drivers
Loại sản phẩm: LED Lighting Drivers
Số lượng Kiện Gốc: 1000
Danh mục phụ: Driver ICs
Dòng cấp nguồn - Tối đa: 900 uA
Loại: Inductive
Đơn vị Khối lượng: 31.300 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542310000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

LM3402/LM3402HV Constant Current Buck Regulators

Texas Instruments LM3402/LM3402HV Constant Current Buck Regulators are monolithic switching regulators designed to deliver constant currents to high-power LEDs. Ideal for automotive, industrial, and general lighting applications, they contain a high-side N-channel MOSFET switch with a current limit of 735mA for step-down (Buck) regulators. Hysteretic control with controlled on-time is coupled with an external resistor. This allows the converter output voltage to adjust as needed to deliver a constant current to series and series - parallel-connected arrays of LEDs. They can be of varying number and type, LED dimming by pulse width modulation (PWM) or broken/open LED protection. Low-power shutdown and thermal shutdown complete the feature set available with this device.