LM3445M/NOPB

Texas Instruments
926-LM3445M/NOPB
LM3445M/NOPB

Nsx:

Mô tả:
LED Lighting Driver ICs Triac dimmable offli ne LED driver 14-SO A 926-LM3445MX/NOPB

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến.
Tối thiểu: 1430   Nhiều: 55
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$0.595 $850.85
$0.589 $2,364.84

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Reel, Cut Tape, MouseReel
Sẵn có:
Có hàng
Giá:
$1.20
Tối thiểu:
1
Nsx Mã Phụ tùng:
Đóng gói:
Reel, Cut Tape, MouseReel
Sẵn có:
Có hàng
Giá:
$1.03
Tối thiểu:
1

Sản phẩm Tương tự

Texas Instruments LM3445MX/NOPB
Texas Instruments
LED Lighting Driver ICs Triac dimmable offli ne LED driver 14-SO A 926-LM3445M/NOPB

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: IC bộ điều khiển chiếu sáng đèn LED
RoHS:  
1 Output
Buck
1 A
SOIC-14
12 V
8 V
30 kHz to 1 MHz
LM3445
- 40 C
+ 125 C
Adjustable Switch Frequency, Enable/Shutdown, Thermal Shutdown
Tube
Nhãn hiệu: Texas Instruments
Làm mờ: Forward Phase (Triac), PWM, Reverse Phase
Điện áp đầu vào: 8 V to 12 V
Kiểu gắn: SMD/SMT
Số lượng kênh: 1 Channel
Loại đầu ra: Constant Current
Loại sản phẩm: LED Lighting Drivers
Số lượng Kiện Gốc: 55
Danh mục phụ: Driver ICs
Dòng cấp nguồn - Tối đa: 2.85 mA
Loại: Inductive
Đơn vị Khối lượng: 338 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542319000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.