LM66100DCKT

Texas Instruments
595-LM66100DCKT
LM66100DCKT

Nsx:

Mô tả:
Hot Swap Voltage Controllers 1.5-V to 5.5-V 1.5- A 0.5-uA IQ ideal d A 595-LM66100DCKR

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 62,780

Tồn kho:
62,780 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
6 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 250)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$0.85 $0.85
$0.611 $6.11
$0.551 $13.78
$0.484 $48.40
Toàn bộ Cuộn (Đơn hàng theo bội số của 250)
$0.451 $112.75
$0.422 $211.00
$0.399 $399.00
$0.392 $1,568.00
$0.378 $3,024.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Sản phẩm Tương tự

Texas Instruments LM66100DCKR
Texas Instruments
Hot Swap Voltage Controllers 1.5-V to 5.5-V 1.5- A 0.5-uA IQ ideal d A 595-LM66100DCKT

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ điều khiển điện áp hoán đổi nóng
RoHS:  
Controllers & Switches
Adjustable
5.5 V
1.5 V
1 Channel
1.5 A
- 40 C
+ 105 C
SMD/SMT
SC70-6
Reel
Cut Tape
MouseReel
No
Nhãn hiệu: Texas Instruments
Điện áp đầu vào / nguồn cấp - Tối đa: 5.5 V
Điện áp đầu vào / nguồn cấp - Tối thiểu: 1.5 V
Loại sản phẩm: Hot Swap Voltage Controllers
Sê-ri: LM66100
Số lượng Kiện Gốc: 250
Danh mục phụ: PMIC - Power Management ICs
Đơn vị Khối lượng: 7 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

LM66100/LM66100-Q1 ±6V Low IQ Ideal Diodes

Texas Instruments LM66100/LM66100-Q1 ±6V Low IQ Ideal Diodes offer integrated Single-Input, Single-Output (SISO) and are well suited for various applications. The LM66100/LM66100-Q1 incorporates a P-channel MOSFET that can operate over an input voltage range of 1.5V to 5.5V and support a maximum continuous current of 1.5A.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.