LMC6035YAFR

Texas Instruments
595-LMC6035YAFR
LMC6035YAFR

Nsx:

Mô tả:
Operational Amplifiers - Op Amps Dual 15.5-V 1.4-MH z operational amplif

Tuổi thọ:
Sản phẩm Mới:
Mới từ nhà sản xuất này.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,996

Tồn kho:
2,996 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$2.92 $2.92
$1.90 $19.00
$1.72 $43.00
$1.45 $145.00
$1.36 $340.00
$1.19 $595.00
$1.01 $1,010.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$0.941 $2,823.00
$0.921 $5,526.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Mạch khuếch đại thuật toán - Op Amp
RoHS:  
1 Channel
1.4 MHz
1.5 V/us
500 uV
20 fA
15.5 V
2 V
650 uA
4 mA
63 dB
27 nV/sqrt Hz
DSBGA-8
SMD/SMT
No Shutdown
- 40 C
+ 85 C
LMC6035
Reel
Cut Tape
Loại bộ khuếch đại: Differential
Nhãn hiệu: Texas Instruments
Bộ công cụ phát triển: AMP-PDK-EVM
Vào - Mật độ dòng nhiễu đầu vào: 6 fA/sqrt Hz
Loại đầu vào: Rail to Rail
Ios - Dòng bù đầu vào: 10 fA
Loại đầu ra: Rail to Rail
Sản phẩm: Operational Amplifiers
Loại sản phẩm: Op Amps - Operational Amplifiers
PSRR - Tỷ lệ loại bỏ nguồn cấp: 63 dB
Số lượng Kiện Gốc: 3000
Danh mục phụ: Amplifier ICs
Công nghệ: CMOS
THD kèm nhiễu: 0.01 %
Dạng cấu hình: Si
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CAHTS:
8542330000
USHTS:
8542330001
MXHTS:
8542330299
ECCN:
EAR99

LMC603x/LMC6035-Q1 Low-Power CMOS Op Amps

Texas Instruments LMC603x/LMC6035-Q1 Low-Power CMOS Operational Amplifiers (Op Amps) are economical, low-voltage op amps capable of rail-to-rail output swing into loads of 600Ω. The LMC6035 is available in a chip-sized package (8-bump DSBGA) using micro SMD package technology. Both devices allow for single-supply operation and are specified for 2.7V, 3V, 5V, and 15V supply voltage. The 2.7V supply voltage corresponds to the end-of-life voltage (0.9V/cell) for three NiCd or NiMH batteries in series, making the LMC603x/LMC6035-Q1 an excellent choice for portable and rechargeable systems. These devices also feature a well-behaved decrease in specifications at supply voltages less than the specified 2.7V operation. This behavior provides a comfort zone for adequate operation at voltages significantly less than 2.7V. The ultra-low input current makes these devices an excellent choice for low-power, active-filter applications because a low-input bias current allows higher resistor and lower capacitor values. In addition, the drive capability of the LMC603x/LMC6035-Q1 makes these op amps an excellent choice in a broad range of applications for low-voltage systems. The Texas Instruments LMC6035-Q1 devices are AEC-Q100 qualified for automotive applications.