LMV341QDCKRQ1G4

Texas Instruments
595-LMV341QDCKRQ1G4
LMV341QDCKRQ1G4

Nsx:

Mô tả:
Operational Amplifiers - Op Amps Automotive-grade si ngle 5.5-V 1-MHz

Tuổi thọ:
Sản phẩm Mới:
Mới từ nhà sản xuất này.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 3,000

Tồn kho:
3,000 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$2.46 $2.46
$1.59 $15.90
$1.42 $35.50
$1.17 $117.00
$1.10 $275.00
$0.96 $480.00
$0.865 $865.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$0.734 $2,202.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Mạch khuếch đại thuật toán - Op Amp
RoHS:  
1 Channel
1 MHz
1 V/us
250 uV
1 pA
5.5 V
2.5 V
107 uA
113 mA
40 dB
40 nV/sqrt Hz
SC-70-6
SMD/SMT
Shutdown
- 40 C
+ 125 C
LMV341
Reel
Cut Tape
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: TH
Vào - Mật độ dòng nhiễu đầu vào: 1 fA
Ios - Dòng bù đầu vào: 6.6 pA
Loại đầu ra: Rail-to-Rail
Sản phẩm: Operational Amplifiers
Loại sản phẩm: Op Amps - Operational Amplifiers
Số lượng Kiện Gốc: 3000
Danh mục phụ: Amplifier ICs
Công nghệ: CMOS
THD kèm nhiễu: 0.017 %
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CAHTS:
8542330000
USHTS:
8542330001
MXHTS:
8542330299
ECCN:
EAR99

LMV34x/LMV34x-Q1 Rail-to-Rail Op Amps

Texas Instruments LMV34x/LMV34x-Q1 Rail-to-Rail Operational Amplifiers (Op Amps) are single, dual, and quad CMOS operational amplifiers. These devices offer low-voltage, low-power, and rail-to-rail output swing capabilities. The PMOS input stage provides an offset voltage of 0.25mV (typical) and an ultra-low input bias current of 1pA (typical). The single-supply amplifier is designed specifically for low-voltage (2.7V to 5V) operation, with a wide common-mode input voltage range that typically extends from –0.2V to 0.8V from the positive supply rail. The LMV341/LMV34x-Q1 (single) offers a shutdown (SHDN) pin that can be used to disable the device. The supply current is reduced to 33nA (typical) in shutdown mode. Additional features of the family are a 20nV/√Hz voltage noise at 10kHz, 1MHz unity-gain bandwidth, 1V/µs slew rate, and 100µA current consumption per channel.