SN74AHCT245N

Texas Instruments
595-SN74AHCT245N
SN74AHCT245N

Nsx:

Mô tả:
Bus Transceivers Tri-State Octal Bus

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 681

Tồn kho:
681 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
6 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$0.94 $0.94
$0.784 $7.84
$0.585 $11.70
$0.54 $54.00
$0.514 $133.64
$0.494 $247.00
$0.448 $448.00
$0.437 $1,748.00
$0.43 $3,440.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ thu phát dây bus
RoHS:  
3-State
AHCT
8 Circuit
9.5 ns
PDIP-20
TTL
CMOS
8 mA
- 8 mA
4.5 V
5.5 V
- 40 C
+ 125 C
Tube
Nhãn hiệu: Texas Instruments
Chức năng: Tri-State Octal Bus
Kiểu gắn: Through Hole
Số lượng kênh: 8 Channel
Cực tính: Non-Inverting
Sản phẩm: Standard Transceivers
Loại sản phẩm: Bus Transceivers
Sê-ri: SN74AHCT245
Số lượng Kiện Gốc: 20
Danh mục phụ: Logic ICs
Dòng cấp nguồn - Tối đa: 4 uA
Đơn vị Khối lượng: 1.199 g
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
8542390990
TARIC:
8542319000
MXHTS:
8542310399
ECCN:
EAR99

SN74AHCT245/SN74AHCT245-Q1 Octal Bus Transceivers

Texas Instruments SN74AHCT245/SN74AHCT245-Q1 Octal Bus Transceivers are designed for asynchronous two-way communication between data buses. These parts operate from 4.5V to 5.5V. The control-function implementation minimizes external timing requirements. The Texas Instruments SN74AHCT245/SN74AHCT245-Q1 allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction–control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. For the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the driver's current-sinking capability determines the resistor's minimum value. The SN74AHCT245-Q1 devices are AEC-Q100 qualified for automotive applications. The SN74AHCT245-EP devices have gold bond wires, a temperature range of –55 to +105°C, and include an SnPb lead finish.