SN74LVC1G79YZPR

Texas Instruments
595-SN74LVC1G79YZPR
SN74LVC1G79YZPR

Nsx:

Mô tả:
Flip Flops Sngl+EdgeTrggrd DTyp eFlipFlop

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 1,105

Tồn kho:
1,105 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
18 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$0.50 $0.50
$0.357 $3.57
$0.319 $7.98
$0.277 $27.70
$0.257 $64.25
$0.245 $122.50
$0.235 $235.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$0.222 $666.00
$0.213 $1,278.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Mạch lật Flip-Flop
RoHS:  
Monostable Multivibrator
LVC
1 Circuit
Single-Ended
DSBGA-5
CMOS, TTL
Non-Inverting
5 ns
- 32 mA
32 mA
1.65 V
5.5 V
SMD/SMT
- 40 C
+ 125 C
Reel
Cut Tape
MouseReel
Nhãn hiệu: Texas Instruments
Số dòng đầu vào: 1
Số lượng đường cửa ra: 1 Line
Loại sản phẩm: Flip Flops
Sê-ri: SN74LVC1G79
Số lượng Kiện Gốc: 3000
Danh mục phụ: Logic ICs
Đơn vị Khối lượng: 1.600 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

SN74LVC1G79/SN74LVC1G79-Q1 D-Type Flip-Flop

Texas Instruments SN74LVC1G79/SN74LVC1G79-Q1 Single D-Type Flip-Flop is designed for 1.65V to 5.5V VCC operation. When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the level at the output. The SN74LVC1G79 is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs when the device is powered down. This feature inhibits current backflow into the device which prevents damage to the device. The SN74LVC1G79-Q1 devices are AEC-Q100 qualified for automotive applications.