TLC5949DBQR

Texas Instruments
595-TLC5949DBQR
TLC5949DBQR

Nsx:

Mô tả:
LED Lighting Driver ICs 16CH 12B ES-PWM Full LED Dvr

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến.
Tối thiểu: 2500   Nhiều: 2500
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)
$1.46 $3,650.00
$1.43 $7,150.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: IC bộ điều khiển chiếu sáng đèn LED
RoHS:  
16 Output
45 mA
QSOP-24
3.6 V
3 V
33 MHz
TLC5949
- 40 C
+ 85 C
Error Flag, Fault Detection, LED Open Detection, LED Short to Ground Detection, LED Short to VLED D
Reel
Nhãn hiệu: Texas Instruments
Điện áp đầu vào: 3 V to 3.6 V
Nhạy với độ ẩm: Yes
Kiểu gắn: SMD/SMT
Số lượng kênh: 16 Channel
Loại sản phẩm: LED Lighting Drivers
Số lượng Kiện Gốc: 2500
Danh mục phụ: Driver ICs
Dòng cấp nguồn - Tối đa: 40 uA
Đơn vị Khối lượng: 1.700 g
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542319000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.