Quay lại Banner Engineering

Banner Engineering S18 Series Photoelectric Sensors

Banner Engineering S18 Series Photoelectric Sensors feature EZ-beam technology with specially designed optics and electronics for reliable sensing without adjustments. The sensors are self-contained, fixed-field, infrared diffuse mode sensors with far-limit cutoff, a type of background suppression. High excess gain and fixed-field technology allow the components to detect low-reflectivity objects while ignoring background surfaces. The S18 EZ-beam series sensors feature a -40°C to 70°C operating temperature range, <1 microamp at 30VDC off-stage leakage current, and 20mA receiver current. These Epoxy encapsulated barrel-mount sensors are leakproof, rated NEMA 6P and IEC IP67 per IEC 60529.

Features

  • Output configuration (DC voltage):
    • SPDT solid-state DC switch; choose NPN (current sinking) or PNP (current sourcing) models
    • Light operate- N.O. output conducts when sensor sees its own (or the emitter’s) modulated light
    • Dark operate- N.C. output conducts when the sensor sees dark; the N.C. (normally closed) output may be wired as a normally open marginal signal alarm output, depending upon wiring to power supply (U.S. patent 5087838)
  • Output rating (DC voltage):
    • 150mA maximum (each) in standard wiring (when wired for alarm output, the total load may not exceed 150mA)
    • <1 microamp at 30VDC OFF-state leakage current:
    • <1V at 10mA DC; <1.5V at 150mA DC ON-state saturation voltage
  • Protected against false pulse on power-up and continuous overload or short circuit of outputs
  • Output response time (DC voltage):
    • 3ms ON and 1.5ms OFF opposed mode models
    • 3ms ON and OFF retroreflective, fixed-field, and diffuse mode models
    • NOTE: 100ms delay on power-up; outputs do not conduct during this time
  • Repeatability:
    • 375μs opposed mode models
    • 750μs retroreflective, fixed-field, and diffuse mode models
    • Repeatability and response are independent of signal strength
  • Environmental rating:
    • Leakproof design rated NEMA 6P and IEC IP67 per IEC 60529
    • IP69K per DIN40050 for the quick disconnect and cable models when the cables are protected from direct spray
  • Vibration and mechanical shock:
    • All models meet MIL-STD-202F, method 201A (vibration: 10Hz to 60Hz maximum, 0.06inch (1.52mm) double amplitude, 10G acceleration) requirements
    • Method 213B conditions H&I
    • 75G with device operating; 100G for non-operation shock

Applications

  • Industrial automation
  • Smart factories
  • Material handling and packaging
  • Conveyor statistics

Dimensional Diagram

Mechanical Drawing - Banner Engineering S18 Series Photoelectric Sensors

Additional Resource

Related Accessories

Cable Assemblies

Related Photoelectric Sensors

Banner Engineering QS30 Long-Range Photoelectric Sensors

Offers high-power sensing with ranges up to 200m.

Learn MoreGiới thiệu về Banner Engineering QS30 Long-Range Photoelectric Sensors View Productsliên quan đến Banner Engineering QS30 Long-Range Photoelectric Sensors

Banner Engineering T18-2 Rugged, Washdown Photoelectric Sensors

Photoelectric sensors for washdown and thermal shock environments on food production lines.

Learn MoreGiới thiệu về Banner Engineering T18-2 Rugged, Washdown Photoelectric Sensors View Productsliên quan đến Banner Engineering T18-2 Rugged, Washdown Photoelectric Sensors

Related Solutions

Banner Engineering Photoelectric Sensor Solutions

Offers various sensor options for industrial manufacturing fields.

Learn MoreGiới thiệu về Banner Engineering Photoelectric Sensor Solutions
View Results ( 149 ) Page
Mã Phụ tùng Bảng dữ liệu Phương pháp cảm biến Khoảng cách cảm biến Chỉ số IP Cấu hình đầu ra Chiều cao Điện áp cấp vận hành Điện áp cấp nguồn - Tối đa Điện áp cấp nguồn - Tối thiểu Phương pháp kết nối
S18SP6FF50 S18SP6FF50 Bảng dữ liệu Background Suppression 50 mm IP67, IP69K PNP-LO/DO 65 mm 10 VDC to 30 VDC 30 VDC 10 VDC Cable
S18SN6FF100Q S18SN6FF100Q Bảng dữ liệu Background Suppression 100 mm IP67, IP69K NPN-LO/DO 83.8 mm 10 VDC to 30 VDC 30 VDC 10 VDC Connector
S18RW3RE S18RW3RE Bảng dữ liệu Opposed Emitter/Receiver 20 m IP67, IP69K Solid State Relay-DO 85.3 mm 20 VAC to 250 VAC 250 VAC 20 VAC Cable
S18RW3DQ1 S18RW3DQ1 Bảng dữ liệu Diffuse 100 mm IP67, IP69K Solid State Relay-DO 104.1 mm 20 VAC to 250 VAC 250 VAC 20 VAC Connector
S18SN6REQ S18SN6REQ Bảng dữ liệu Opposed Receiver 20 m IP67, IP69K NPN-LO/DO 78 mm 10 VDC to 30 VDC 30 VDC 10 VDC Connector
S18SP6LPQPMA S18SP6LPQPMA Bảng dữ liệu Retroreflective 2 m IP67, IP69K PNP-LO/DO 83.8 mm 10 VDC to 30 VDC 30 VDC 10 VDC Cable with Connector
S18RW3FF25 S18RW3FF25 Bảng dữ liệu Background Suppression 25 mm IP67, IP69K Solid State Relay-DO 86.3 mm 20 VAC to 250 VAC 250 VAC 20 VAC Cable
S18SN6DLQ S18SN6DLQ Bảng dữ liệu Diffuse 300 mm IP67, IP69K NPN-LO/DO 78 mm 10 VDC to 30 VDC 30 VDC 10 VDC Connector
S18SP6FF50 W/30 S18SP6FF50 W/30 Bảng dữ liệu Background Suppression 50 mm IP67, IP69K PNP-LO/DO 65 mm 10 VDC to 30 VDC 30 VDC 10 VDC Cable
S18SN6RE S18SN6RE Bảng dữ liệu Opposed Receiver 20 m IP67, IP69K NPN-LO/DO 59.2 mm 10 VDC to 30 VDC 30 VDC 10 VDC Cable
Đã phát hành: 2023-08-23 | Đã cập nhật: 2025-07-29