dsPIC33CDVC128MP506-I/M9

Microchip Technology
579-DVC128MP506-I/M9
dsPIC33CDVC128MP506-I/M9

Nsx:

Mô tả:
Digital Signal Processors & Controllers - DSP, DSC 16-bit DSC, 256K Flash, 24K RAM, 3-Phase FET Driver, LDO, CAN XCVR, 64-Pin

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 175

Tồn kho:
175 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
6 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$3.52 $3.52
$3.20 $80.00
$2.91 $349.20

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Microchip
Danh mục Sản phẩm: Bộ xử lý & bộ điều khiển tín hiệu số - DSP, DSC
RoHS:  
DSCs
dsPIC33CD
50 kHz
VQFN-64
128 kB
16 kB
4.5 V to 5.5 V
SMD/SMT
- 40 C
+ 150 C
Tube
Nhãn hiệu: Microchip Technology
Kiểu lệnh: Fixed Point
Loại giao diện: I2C, I2S, SPI, UART
Nhạy với độ ẩm: Yes
Số lượng I/O: 29 I/Os
Số bộ hẹn giờ/bộ đếm: 1
Loại sản phẩm: Digital Signal Processors & Controllers - DSP, DSC
Loại bộ nhớ chương trình: Flash
Số lượng Kiện Gốc: 40
Danh mục phụ: Embedded Processors & Controllers
Điện áp cấp nguồn - Tối đa: 5.5 V
Điện áp cấp nguồn - Tối thiểu: 4.5 V
Bộ hẹn giờ giám sát: Watchdog Timer
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

USHTS:
8542310030
TARIC:
8542319000
ECCN:
3A991.a.2

dsPIC33CDVC256MP506 Integrated Motor Drivers

Microchip Technology dsPIC33CDVC256MP506 Integrated Motor Drivers combine a digital signal controller (DSC) with a full-bridge MOSFET gate driver designed for 3-phase BLDC motor control and a CAN transceiver for automotive communications. The 100MHz dsPIC® DSC with DSP, advanced motor control PWMs, 12-bit A/D converter, and integrated op amps and comparators are designed to run Field Oriented Control (FOC), providing the maximum energy efficiency and the lowest system cost. The full-bridge gate driver controls six external NMOS FETs and includes an integrated charge pump for low-voltage operation, programmable dead-time, and comprehensive protection circuits. The integrated motor driver can be powered by a single power supply up to 29V (operation) and 40V (transient) with the dsPIC DSC powered by an internal 3.3V LDO voltage regulator. Automotive applications include cooling fans, gas, oil and water pumps, compressors, valves, actuators, and turbochargers. Industrial and commercial applications include power tools and other battery-powered equipment.