TS19503CB10H RBG

Taiwan Semiconductor
821-TS19503CB10HRBG
TS19503CB10H RBG

Nsx:

Mô tả:
LED Lighting Driver ICs 2A, Step-Down LED Driver with Integrated N-channel FET High-Side Current Sense

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,443

Tồn kho:
2,443 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
16 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Số lượng lớn hơn 2443 sẽ phải tuân thủ các yêu cầu đặt hàng tối thiểu.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 5000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$1.37 $1.37
$0.999 $9.99
$0.906 $22.65
$0.803 $80.30
$0.754 $188.50
$0.725 $362.50
$0.666 $666.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 5000)
$0.644 $3,220.00
$0.643 $6,430.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Taiwan Semiconductor
Danh mục Sản phẩm: IC bộ điều khiển chiếu sáng đèn LED
RoHS:  
1 Output
Buck
2 A
MSOP-10
75 V
4.5 V
1 MHz
Adjustable
TS19503
- 40 C
+ 125 C
PWM Dimming, Open LED Protection
AEC-Q101
Reel
Cut Tape
MouseReel
Nhãn hiệu: Taiwan Semiconductor
Làm mờ: Analog, PWM
Điện áp đầu vào: 4.5 V to 75 V
Nhạy với độ ẩm: Yes
Kiểu gắn: SMD/SMT
Số lượng kênh: 1 Channel
Sản phẩm: LED Drivers
Loại sản phẩm: LED Lighting Drivers
Số lượng Kiện Gốc: 5000
Danh mục phụ: Driver ICs
Dòng cấp nguồn - Tối đa: 1.5 mA
Mã Bí danh: TS19503CB10H
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542399000
USHTS:
8542390090
TARIC:
8542399000
ECCN:
EAR99

TS19503CB10H Step-Down LED Driver

Taiwan Semiconductor TS19503CB10H Step-Down LED Driver is a continuous conduction mode inductive step-down converter that is designed to drive single and multiple LEDs. This LED driver provides a high accuracy output current that is externally adjustable up to 2A. The step-down LED driver includes the power switch and a high-side output current sensing circuit that uses an external resistor to set the nominal average output. This device offers an FLT flag when an open load or over-temperature condition is detected. The step-down LED driver provides more than 25 watts of output power and operates from 4.5V to 75V input supply range. This LED driver offers an efficiency of up to 97% and up to 1MHz of switching frequency. The TS19503CB10H LED driver is RoHS compliant and is used in applications such as automotive exterior lighting and LED general lighting.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.