TPS92629QDGNRQ1

Texas Instruments
595-TPS92629QDGNRQ1
TPS92629QDGNRQ1

Nsx:

Mô tả:
LED Lighting Driver ICs Automotive single-c hannel high-current

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,014

Tồn kho:
2,014 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
6 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$2.34 $2.34
$1.73 $17.30
$1.57 $39.25
$1.41 $141.00
$1.33 $332.50
$1.28 $640.00
$1.24 $1,240.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)
$1.20 $3,000.00
$1.17 $5,850.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: IC bộ điều khiển chiếu sáng đèn LED
RoHS:  
3 Output
250 mA
45 V
4.5 V
4.2 V to 4.8 V
TPS92629
- 40 C
+ 125 C
Reel
Cut Tape
MouseReel
Nhãn hiệu: Texas Instruments
Bộ công cụ phát triển: TPS92629Q1EVM
Làm mờ: Analog
Điện áp đầu vào: 4.5 V to 45 V
Nhạy với độ ẩm: Yes
Kiểu gắn: SMD/SMT
Số lượng kênh: 1 Channel
Sản phẩm: LED Drivers
Loại sản phẩm: LED Lighting Drivers
Số lượng Kiện Gốc: 2500
Danh mục phụ: Driver ICs
Loại: Automotive High Side LED Driver
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CAHTS:
8542390000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

TPS92629-Q1 40V Single-Channel LED Driver

Texas Instruments TPS92629-Q1 40V Single-Channel LED Driver includes a unique thermal management design to reduce temperature rising on the device. The TPS92629-Q1 is a linear driver directly powered by automotive batteries with large voltage variations to output full current loads up to 250mA. External shunt resistors are leveraged to share output current and dissipate power out of the driver. The device’s full-diagnostic capabilities include LED open, LED short-to-GND, LED short-to-battery circuit, and device overtemperature protection. The high accuracy optimized slew rate of analog dimming control support off-board long-wire driving with enhanced EMC performance. The Texas Instruments TPS92629-Q1 also eliminates flick and after-image issues. Different voltage levels could report multiple faults through fault pins for safety-critical applications.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.