NLCV25T-R68M-EFRD

TDK
810-NLCV25TR68MEFRD
NLCV25T-R68M-EFRD

Nsx:

Mô tả:
RF Inductors - SMD 0.68uH 0.09ohm 1.26A 2.5x2.0mm AEC-Q200

Bảng dữ liệu:
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.
Thêm Thông tin
Tìm hiểu thêm về TDK NLCV25T-R68M-EFRD

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
10 Tuần Thời gian sản xuất tại nhà máy dự kiến.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$0.21 $0.21
$0.172 $1.72
$0.151 $3.78
$0.142 $14.20
$0.124 $31.00
$0.114 $114.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)
$0.107 $214.00
$0.102 $408.00
$0.095 $950.00

Các sản phẩm tương tự

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
TDK
Danh mục Sản phẩm: Cuộn cảm RF - SMD
RoHS:  
Wirewound
1008 (2520 metric)
Unshielded
680 nH
20 %
1.26 A
90 mOhms
- 40 C
+ 125 C
5
Standard
2.5 mm
2 mm
1.8 mm
Ferrite
AEC-Q200
NLCV-EFRD
Reel
Cut Tape
Ứng dụng: Commercial
Nhãn hiệu: TDK
Mã vỏ - inch: 1008
Mã vỏ - mm: 2520
Kiểu gắn: PCB Mount
Sản phẩm: RF Inductors
Loại sản phẩm: RF Inductors - Leaded
Số lượng Kiện Gốc: 2000
Danh mục phụ: Inductors, Chokes & Coils
Kiểu chấm dứt: SMD/SMT
Tần số kiểm tra: 25.2 MHz
Mã Bí danh: NLCV25T-R68M-EFRD -
Đơn vị Khối lượng: 10 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Bảng dữ liệu

Mã Tuân Thủ
CNHTS:
8504500000
CAHTS:
8504500000
USHTS:
8504508000
JPHTS:
8504500001
KRHTS:
8504509090
TARIC:
8504509590
MXHTS:
8504509102
BRHTS:
85045000
ECCN:
EAR99
Phân loại nguồn gốc
Quốc gia xuất xứ:
Nhật Bản
Quốc gia lắp ráp:
Không Có sẵn
Quốc gia phân phối:
Không Có sẵn
Quốc gia có thể thay đổi tại thời điểm giao hàng.

NLCV-EFRD Automotive Inductors

TDK NLCV-EFRD Automotive Inductors are resin mold-type wound inductors for decoupling circuits. This series features an operating temperature range of -40°C to +125°C and an inductance range of 0.1µH to 330µH. Typical applications for TDK NLCV-EFRD Automotive Inductors include car navigation systems, car audio, and electronic throttle control (ETC).

NLCV25-PFD Inductors

TDK NLCV25-PFD Inductors for decoupling circuits feature a resin mold-type wound device. This series is designed for vehicle accessories such as car navigation systems, car audio, and more.

Electric Vehicle Solutions

The rise of electric vehicles brings with it the need for downsized components that remain robust and effective. TDK provides a wide variety of electronic components well-suited to meet demands of the harsh environments of automotive applications. Products such as inductors, common-mode chokes, ferrite beads, MLCCs, and more are designed with specialized materials and unique structures to offer high performance and reliability under even the most severe usage conditions.

Inductors

TDK Inductors are manufactured using state-of-the-art multilayer processing technologies, wire-winding technology, or thin-film technologies. TDK's unique multilayer processing technology provides higher inductance and Q characteristics as well as further miniaturization. The portfolio includes a wide spectrum of filters, SMT inductors, power inductors, transponder coils, and line reactors. These components are designed for use in high frequency, signal, and power circuits. TDK Inductors are ideal for a range of applications, including mobile devices, consumer electronics, solar power inverters, power supplies, onboard chargers, and automobile systems. AEC-Q200-qualified inductors are available.

Signal Inductors

TDK Signal Inductors are manufactured using state-of-the-art multilayer processing and wire-winding technologies. Its wire-winding technology uses a highly-effective closed magnetic circuit with ferrite particles of high permeability, to enable lower Rdc values and reduced energy consumption. TDK Signal Inductors are designed for use in a wide variety of applications, ranging from mobile devices and consumer electronics to various types of automotive equipment and systems.

Electric Vehicle - Safety

TDK Electric Vehicle Safety products include MLCCs, inductors, EMC components, and sensor systems designed to meet rigorous requirements for quality and long-term performance. With strict standards for safety-critical applications such as ADAS, airbag, EPS, ABS, TPMS (among others), automotive manufacturers rely heavily on the high-performance and stability of the electronic components used in these systems. 

NLCV Wound Ferrite Inductors

TDK NLCV Wound Ferrite Inductors are resin mold-type wound inductors for decoupling circuits. These devices have an operating temperature range of -40°C to +105°C. Applications for TDK NLCV Wound Ferrite Inductors include smart meters, AV equipment, xDSL, vehicle accessories, and industrial electronic devices for communications infrastructure.

Inductors for Decoupling Circuits

TDK Inductors for Decoupling Circuits include several product families that serve different types of applications. Among these application types are engine control models, automotive (including advanced driver assistance), smart meters, AV equipment, xDSL, vehicle accessories, and industrial electronic devices. Select models within this family of inductors provide high reliability in harsh conditions, withstanding temperatures up to 150°C. The TDK inductors feature unique construction options, including soft termination technology, resin molds, and more. TDK Inductors for Decoupling Circuits are available in several package sizes, with various levels of resistance and rated currents. 

Electric Vehicle - Network

With the aim of improving things like safe driving, lowering the environmental burden, and increasing passenger comfort, vehicles increasingly need a high-speed in-vehicle LAN that connect multiple ECUs (electronic control units) together. The number of sensors and camera equipment necessary to meet the demand of added functionality has contributed to weight increases in the wiring harnesses and increased EMI. TDK offers a number of electronic components such as common mode filters, chip varistors, MLCC arrays, and "soft termination" MLCCs, designed to conserve space in ECU circuit boards, provide effective countermeasures against EMI, and maintain a high level of performance even in the harshest automotive environments.

Đã xảy ra lỗi ngoài dự kiến.


Bạn có câu hỏi? Vui lòng truy cập Trung tâm Trợ giúp.
Để hỏi về một đơn hàng cụ thể, vui lòng đăng nhập vào tài khoản của bạn.

Nếu bạn gặp thêm vấn đề, vui lòng liên hệ với chúng tôi theo số 800-346-6873 hoặc gửi email tới help@mouser.com.