BCR421UE6327HTSA1

Infineon Technologies
726-BCR421UE6327HTSA
BCR421UE6327HTSA1

Nsx:

Mô tả:
LED Lighting Driver ICs LED DRIVER

Tuổi thọ:
Hết hạn sử dụng:
Nhà sản xuất đã lên kế hoạch ngừng và sẽ không sản xuất nữa.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 244

Tồn kho:
244 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
17 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$0.35 $0.35
$0.239 $2.39
$0.213 $5.33
$0.184 $18.40
$0.17 $42.50
$0.162 $81.00
$0.155 $155.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$0.147 $441.00
$0.143 $858.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Reel, Cut Tape, MouseReel
Sẵn có:
Có hàng
Giá:
$0.79
Tối thiểu:
1

Sản phẩm Tương tự

Infineon Technologies BCR 421U E6327
Infineon Technologies
LED Lighting Driver ICs LED DRIVER
Hết hạn sử dụng: Nhà sản xuất đã lên kế hoạch ngừng và sẽ không sản xuất nữa.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Infineon
Danh mục Sản phẩm: IC bộ điều khiển chiếu sáng đèn LED
RoHS:  
1 Output
Boost
200 mA
SC74-3D
4.5 V
4.5 V
10 kHz
40 V
BCR421
- 65 C
+ 150 C
Low Side Current Control
AEC-Q100
Reel
Cut Tape
MouseReel
Nhãn hiệu: Infineon Technologies
Điện áp đầu vào: 4.5 V
Kiểu gắn: SMD/SMT
Số lượng kênh: 1 Channel
Loại sản phẩm: LED Lighting Drivers
Số lượng Kiện Gốc: 3000
Danh mục phụ: Driver ICs
Dòng cấp nguồn - Tối đa: 11 mA
Mã Bí danh: BCR 421U E6327 SP000665922
Đơn vị Khối lượng: 12.550 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Bảng dữ liệu

Application Notes

EOL

Models

Product Catalogs

SPICE Models

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8541290000
USHTS:
8542390090
JPHTS:
8541290100
KRHTS:
8541219000
TARIC:
8541290000
MXHTS:
85412999
ECCN:
EAR99

BCR42xU LED Driver

Infineon BCR42xU LED driver provides a low-cost solution for driving 0.25W LEDs with an LED forward current up to 150mA. The internal breakdown voltage is 40V, which is the maximum voltage that the Infineon BCR42xU LED driver IC can sustain. With no need for additional external components like inductors, capacitors, and freewheeling diodes, the Infineon BCR42xU LED drivers are a cost-efficient and PCB-area saving solution.

BCR Linear LED Drivers

Infineon BCR Linear LED Drivers are designed to drive LED currents from 10mA to 700mA, making them suitable for LEDs in general lighting applications. Infineon BCR linear LED drivers can be used to drive LED currents between 10mA and 250mA, preventing thermal runaway. 

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.