IR21531STRPBF

Infineon Technologies
942-IR21531STRPBF
IR21531STRPBF

Nsx:

Mô tả:
Gate Drivers HALF BRDG DRVR 600V 15.6Vclamp 0.6

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 3,166

Tồn kho:
3,166 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
24 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$1.67 $1.67
$1.26 $12.60
$1.16 $29.00
$1.05 $105.00
$0.989 $247.25
$0.951 $475.50
$0.922 $922.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)
$0.811 $2,027.50
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Tube
Sẵn có:
Có hàng
Giá:
$4.39
Tối thiểu:
1

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Infineon
Danh mục Sản phẩm: Bộ điều hợp cổng
RoHS:  
Half-Bridge Drivers
High-Side, Low-Side
SMD/SMT
SOIC-8
2 Driver
2 Output
260 mA
10 V
20 V
150 ns
100 ns
- 40 C
+ 125 C
Reel
Cut Tape
MouseReel
Nhãn hiệu: Infineon Technologies
Đặc điểm nổi bật: Synchronous
Loại logic: CMOS
Nhạy với độ ẩm: Yes
Dòng cấp nguồn vận hành: 5 mA
Pd - Tiêu tán nguồn: 625 mW
Loại sản phẩm: Gate Drivers
Số lượng Kiện Gốc: 2500
Danh mục phụ: PMIC - Power Management ICs
Công nghệ: Si
Đơn vị Khối lượng: 540 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542310000
USHTS:
8542310075
KRHTS:
8542311000
TARIC:
8542319000
MXHTS:
8542310302
ECCN:
EAR99

IR21531 Half-Bridge Driver

Infineon Technologies IR21531 Half-Bridge Driver has a shutdown feature designed into the CT pin, allowing gate driver outputs to be disabled using low voltage control signals. This half-bridge driver achieves improved noise immunity by lowering the peak di/dt of the gate drivers and by increasing undervoltage lockout hysteresis to 1V. The IR21531 half-bridge driver features true micropower startup, tighter initial deadtime control, low-temperature coefficient dead, and excellent latch immunity on all inputs and outputs. This half-bridge driver offers Electrostatic Discharge (ESD) protection on all leads, a lower di/dt gate driver for better noise immunity, and low side output in phase with RT. The IR21531 half-bridge driver is ideal for the primary side and lighting fluorescent ballast.

EiceDRIVER™ Gate Driver ICs

Infineon EiceDRIVER™ Gate Driver ICs are designed for MOSFETs, IGBTs, SiC MOSFETs, and GaN HEMTs devices. EiceDRIVER™ gate drivers provide a wide range of typical output current options, from 0.1A up to 10A. These devices have robust gate drive protection features such as fast short-circuit protection (DESAT), active Miller clamp, shoot-through protection, fault, shutdown, and over current protection. These features make these driver ICs well-suited for both silicon and wide-bandgap power devices, including CoolGaN™, and CoolSiC™. That’s why Infineon offers more than 500 EiceDRIVER™ gate driver IC solutions suitable for any power switch, and any application.