74LVC2T45FK,LF(CT

Toshiba
757-74LVC2T45FKLFCB
74LVC2T45FK,LF(CT

Nsx:

Mô tả:
Bus Transceivers 1-Bitx2 Dual SupplyTranscvr,SOT-765(US8)

Tuổi thọ:
Sản phẩm Mới:
Mới từ nhà sản xuất này.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 416

Tồn kho:
416
Có thể Giao hàng Ngay
Đang đặt hàng:
3,000
Dự kiến 15/06/2026
Thời gian sản xuất của nhà máy:
24
Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$0.69 $0.69
$0.409 $4.09
$0.352 $8.80
$0.275 $27.50
$0.229 $57.25
$0.193 $96.50
$0.172 $172.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$0.145 $435.00
6,000 Báo giá

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Toshiba
Danh mục Sản phẩm: Bộ thu phát dây bus
RoHS:  
3-State
2 Circuit
5 ns
SOT-765-8
32 mA
32 mA
1.65 V
5.5 V
- 40 C
+ 125 C
Reel
Cut Tape
Nhãn hiệu: Toshiba
Chức năng: Transceiver
Kiểu gắn: SMD/SMT
Số lượng kênh: 2 Channel
Pd - Tiêu tán nguồn: 200 mW
Cực tính: Bidirectional
Sản phẩm: Bus Transceivers
Loại sản phẩm: Bus Transceivers
Số lượng Kiện Gốc: 3000
Danh mục phụ: Logic ICs
Dòng cấp nguồn - Tối đa: 500 uA
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

USHTS:
8542390090
TARIC:
8542319000
MXHTS:
8542399999
ECCN:
EAR99

74LVC2T45FK 2-Bit Dual Supply Bus Transceiver

Toshiba 74LVC2T45FK 2-Bit Dual Supply Bus Transceiver facilitates interfacing between two systems with 1.65V to 5.5V power supply voltages. Within the operating range, the user can set the voltage of the two supply voltages as preferred, and the order in which the supply voltages are turned on and off can also be voluntarily set. When the transmission direction switching input DIR is set to "H," the A bus becomes an input, and the B bus becomes output, and when DIR is set to "L," the B bus becomes an input, and the A bus becomes output. The input (DIR) allows a voltage of up to 5.5V to be applied regardless of the power supply voltage by the tolerant function. The power-down protection function of the bus terminals (nA, nB) allows a voltage of up to 5.5V to be applied when the power supply is at GND level. Furthermore, when the power supply is at the GND level, the bus terminals become in high impedance mode, and a voltage of up to 5.5V can be applied. This function provides the application with a partial power down of interfaces. All inputs have protection circuits added to protect the device from electrostatic breakdown.