TPS7H2211MDAPTSEP

Texas Instruments
595-TPS7H2211MDAPTSE
TPS7H2211MDAPTSEP

Nsx:

Mô tả:
Hot Swap Voltage Controllers Radiation-tolerant 4.5-V to 14-V input 3.5-A eFuse

Tuổi thọ:
Sản phẩm Mới:
Mới từ nhà sản xuất này.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
0

Bạn vẫn có thể mua sản phẩm này bằng đơn hàng dự trữ

Đang đặt hàng:
30
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$695.89 $695.89
$648.21 $6,482.10
Toàn bộ Cuộn (Đơn hàng theo bội số của 250)
$648.21 $162,052.50

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ điều khiển điện áp hoán đổi nóng
RoHS:  
Hot Swap Voltage Controllers
8 A
14 V
4.5 V
1 Channel
5 mA
- 55 C
+ 125 C
SMD/SMT
HTSSOP-32
Reel
Cut Tape
Yes
Nhãn hiệu: Texas Instruments
Bộ công cụ phát triển: TPS7H2211EVM
Điện áp đầu vào / nguồn cấp - Tối đa: 14 V
Điện áp đầu vào / nguồn cấp - Tối thiểu: 4.5 V
Nhạy với độ ẩm: Yes
Loại sản phẩm: Hot Swap Voltage Controllers
Sê-ri: TPS7H2211
Số lượng Kiện Gốc: 250
Danh mục phụ: PMIC - Power Management ICs
Mã Bí danh: V62/23609-01XE
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

USHTS:
8542390090
ECCN:
EAR99

TPS7H2211 Single Channel eFuse

Texas Instruments TPS7H2211 Single Channel eFuse includes an integrated FET load switch with additional features to provide reverse current protection, overvoltage protection, and a configurable rise time to minimize soft start and inrush current. The device contains P-channel MOSFETs that support a maximum continuous current of 3.5A and operate over an input voltage range of 4.5V to 14V.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.