PE-1812ACC110STS

Pulse Electronics
673-PE-1812ACC110STS
PE-1812ACC110STS

Nsx:

Mô tả:
Common Mode Chokes / Filters AEC-Q200 Chip Choke 11uH .5Ohms Q200

Tuổi thọ:
Hết hạn sử dụng:
Nhà sản xuất đã lên kế hoạch ngừng và sẽ không sản xuất nữa.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
0

Bạn vẫn có thể mua sản phẩm này bằng đơn hàng dự trữ

Đang đặt hàng:
7,991
Dự kiến 19/02/2026
Thời gian sản xuất của nhà máy:
14
Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 500)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$0.93 $0.93
$0.794 $7.94
$0.728 $18.20
$0.59 $59.00
$0.557 $139.25
Toàn bộ Cuộn (Đơn hàng theo bội số của 500)
$0.427 $213.50
$0.393 $393.00
$0.387 $967.50
$0.376 $1,880.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Pulse
Danh mục Sản phẩm: Cuộn cản / bộ lọc chế độ thông thường
RoHS:  
ACC
PCB Mount
SMD/SMT
1 Channel
11 uH
- 30 %, + 50 %
360 uA
500 mOhms
- 40 C
+ 125 C
1812 (4532 metric)
4.5 mm
3.2 mm
3 mm
AEC-Q200
Reel
Cut Tape
MouseReel
Nhãn hiệu: Pulse Electronics
Loại sản phẩm: Common Mode Chokes
Bọc chắn: Shielded
Số lượng Kiện Gốc: 500
Danh mục phụ: Inductors, Chokes & Coils
Thương hiệu: Automotive Chip Choke
Đơn vị Khối lượng: 27 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8504500000
CAHTS:
8548000000
USHTS:
8548000000
JPHTS:
854800000
KRHTS:
8504509010
MXHTS:
8504509102
BRHTS:
85045000
ECCN:
EAR99

Group I/O Products

YAGEO Group (YAGEO, KEMET, Pulse) I/O Products include antennas, capacitors, chokes, filters, transformers, connectors, sensors, and inductors. In a digital system, the inputs and outputs are vital in their communication with other systems and devices. These are the arms and legs of the system that give it the ability to do work. They typically consist of USB connections, internal and external antennas, integrated RJ45 modules, and environmental sensors. Each of these connectors typically requires some type of controller, and in some cases, signal line chokes to filter out various noises. The controllers themselves contain RF capacitors and inductors that filter out unwanted noise and interfering signals. The block diagram below is an example of a network of input and output connectors and devices offered by YAGEO Group.

Automotive Communications Solutions

Pulse Electronics Automotive Communications Solutions feature a full line of AEC-Q200-qualified Ethernet Magnetics and Common Mode Chokes for automotive communication applications. Pulse Electronics automotive products are designed to operate from -40°C up to +125°C, offer high reliability, and meet AEC-Q200 requirements. These components are also designed to meet 100BASE-TX/T1 and 1000BASE-T/T1 IEEE802.3 standards and support all major PHY manufacturers.

WE-CMB Common Mode Power Line Inductors (Chokes)

Würth Elektronik WE-CMB Common Mode Power Line Inductors (Chokes) feature a compact design that delivers high suppression of asymmetric interferences, even at low-frequency ranges. In addition, these inductors provide broadband screening due to a low capacitance winding technique. Würth Elektronik WE-CMB Common Mode, Power Line Inductors, are ideal for power electronics and suppressing common-mode noises. Parasitics can have a significant effect on the noise attenuation and current rating of a common mode filter. Würth designed the WE-CMB series for minimal parasitic effects over its useful frequency bandwidth so it does what it is designed to do - get rid of the noise.